教师名录

教育背景：
1993-1997 美加墨世界杯官方网站土木工程系工业与民用建筑　本科
1997-2000 美加墨世界杯官方网站土木工程系结构工程　硕士
2000-2003 英国利兹大学结构工程　博士

工作背景：
2000-2000 香港理工大学土木工程系 助理研究员
2003-2005 英国巴斯大学幕墙研究中心 结构工程师
2005-2006 美国Axis幕墙咨询公司 高级工程师
2006-2012 英国伯明翰大学土木工程系 讲师 （2011起兼任结构学科负责人和土木硕士点负责人）
2012 -2019 美加墨世界杯官方网站土木工程系 研究员，博士生导师
2020 -2026 美加墨世界杯官方网站 副院长
2019-今 美加墨世界杯官方网站土木工程系 长聘教授，博士生导师

专业资格:

2010 - 英国混凝土协会注册会员 (MCS)
2012 - 英国结构工程师学会注册会员(MIStructE)，英国皇家特许工程师(CEng)
2016 - 英国土木工程师学会会士(FICE)

结构工程，绿色建筑材料，新型结构系统，智能建造与运维，建筑工业化，人工智能在土木中的应用，数字孪生
Structural Engineering; Sustainable construction materials (recycled concrete, FRP); Novel structural systems (glass structures, precast concrete structures); Façade systems (energy efficient glazing systems, safety monitoring and maintenance of façades in service); Off-site construction; Smart construction and maintenance, Artificial Intelligence (AI) for Civil Engineering, Digital twin

2021年 – 现在  Engineering Structures 编委

2026年 – 现在  《建筑材料学报》第八届 编委

2025年 – 现在 上海市公共建筑和基础设施数字化运维重点实验室  主任
2026年 – 现在  中国土木工程学会人工智能与产业融合分会 常务理事

2026年 – 现在 上海市数据技术协会 副会长

2026年 – 2029年 上海市住房和城乡建设管理委员会工程质量安全智能监管工程技术创新中心 副主任

2026年 – 2029年 上海市住房和城乡建设管理委员会建筑工程绿色低碳施工可持续发展工程技术创新中心 副主任

2025年 – 2028年上海市住房和城乡建设管理委员会工程可靠性工程技术创新中心 副主任

2025年 – 2028年上海市住房和城乡建设管理委员会建筑工程智能建造与机器人重点实验室 副主任

2025年 – 2028年 湖南省建筑与市政数字孪生工程技术研究中心 专家指导委员会主任

2023年 – 现在 上海市绿色建筑协会 副会长

2022年 – 现在 中国机械工业教育协会第一届智能建造专业教学委员会

2010年 – 现在 中国硅酸盐学会测试技术分会理事会理事、副理事长

PhD scholarship is available for international applicants on various research topics. Please contact Professor Yang via j.yang.1@sjtu.edu.cn or ResearchGate profile: https://www.researchgate.net/profile/Jian_Yang24

1. 2026 - 2029，水凝胶内封中空钙钛矿光伏玻璃功能结构耦合分析与协同优化，自然科学基金面上项目（主持）

2. 2025 - 2028，宁夏建筑工程质量安全智慧监测预警管理关键技术研发与应用，宁夏回族自治区/宁夏回族自治区银川市项目（主持）

3. 2025 – 2027, 高频冻融地区重大水工结构材料抗冰性能提升及全生命周期性能优化技术，中央引导地方科技发展资金项 

4. 2024 - 2027，数智综合交通枢纽系统建设和运维关键技术，上海市住房和城乡建设管理委员会（主持）

5. 2023 - 2024，城镇既有建筑数字化建模与承载性能评估研究，重点实验室开放基金（主持）

6. 2022 -2023， 面向全寿命的高原装配式建筑的低碳建造与维养关键技术，四川-西藏联合基金

7. 2021-2024，新型建筑外围护体系智能感应、数字化运维及修复技术研究 (21dz1204704)，上海市科委“科技创新行动计划”社发项目 

8. 2021 - 2024,  新型梯度中间膜对结构玻璃开裂后承载性能提升研究, 自然科学基金面上项目 （主持）

9. 2020 - 2023，基于人工智能的物业风险管理处置及预测关键技术与系统，上海市科委“科技创新行动计划”社发项目 （主持）

10. 2018 – 2022，大型组装式造楼平台远程智能监控平台 ，上海市科委“科技创新行动计划”社发项目 （子课题牵头）

11. 2017 – 2021，玻璃结构破坏仿真模拟及鲁棒优化设计方法，科技部“重点研发”项目（子课题牵头）

12. 2017 – 2021，既有玻璃幕墙安全健康预警技术和安全性能提升技术研究，上海市科委“科技创新行动计划”社发项目（子课题牵头）

13. 2016 – 2019，装配式混凝土结构防连续倒塌设计理论，科技部“重点研发”项目（子课题牵头）

14. 2014 – 2017，建筑玻璃结构在刚体冲击下的破坏机理及预测模型研究，国家自然科学基金面上项目 （主持）

15. 2014 – 2015，建筑玻璃在风载和风致飞射物共同作用下的破坏机理研究和预测分析，教育部博士点基金新教师项目 （主持）

16. 2014 – 2016，建筑结构夹胶玻璃在静动载联合作用下的破坏机理和承载力预测研究，上海市教委创新重点项目 （主持）

17. 2014 – 2016，重大建设工程科技创新治理体系研究，上海市科委“科技创新行动计划”社发项目

18. 2013 – 2015，基于全寿命性能设计理论海上风力发电机混凝土塔架考虑其腐蚀劣化和疲劳损伤以及在极端环境荷载作用下的动力分析，上海市科委“浦江人才计划”项目（主持）

19. 2012 – 2015，绿色建筑材料和新型结构体系，中组部海外高层次人才项目（主持）

20. 2012 – 2013，基于全寿命性能设计理论(Performance-Based Design)混凝土离岸风力发电机塔架考虑其疲劳损伤和腐蚀等病变情况下在复杂荷载作用下的动力分析，重点实验室青年创新基金（主持）

21. 部分横向项目：
浮式风机基础垂荡舱钢混结构切条模型试验

新型模块化建筑关键技术咨询研发服务

衢州市体育中心工程-三馆及配套工程技术服务

新能源与工业安全用纤维基功能复合材料研发

基于深度学习的点云生成BIM模型技术研究

基于混合现实的变压器操作与异常故障检修数智化培训技术研究

基于虚拟现实的三维仿真电力变压器耐压试验数智化培训技术研究

便携式智能液压加载电缆垂直蛇形敷设装备研发

某重点梯级水电站高地温环境特种材料设计与研发

基于大语言模型的变电站土建图模智能化生成技术研究

惰性物料填海工程地基处理及沉降计算研究

铁路客运综合交通枢纽数字化赋能建运与服务一体衔接方案研究

耐高温保温材料节能高效生产过程和高质量新产品研究

有限空间电网施工安全评价仿真试验平台开发

浮式风电平台钢混组合及钢筋混凝土基础结构设计分析及模型试验

基于混合现实的变电站倒闸操作数字化培训技术研究

超宽桥面展翅箱梁空间-温度效应耦合作用分析及控制技术研究

典型居住建筑运营阶段能耗与碳排放预测模型研究

智能化低碳绿色建造关键技术研究

数字孪生技术在电力基建工程中应用研究

金建高速铁路环保集约型梁场建设综合技术应用研究 

复杂高层玻璃幕墙设计、施工与运维过程中的数字化辅助方法

高性能安全夹层玻璃用PVE/SGE中间膜（胶片）材料特性研究

“双碳”背景下电网输变电工程全生命周期绿色低碳评价研究及体系搭建

输配电工程建设阶段碳排放实时监测与在线管控关键技术研究与示范

大型楼宇运维过程中的碳排放和能耗智能管控技术研究

基于数字化和装配式融合技术的既有高铁运营线高架站房建造关键技术研究

在水一方新建工程结构施工监测技术服务

低碳低聚物基再生混凝土关键技术研发与应用

变电站土建碳足迹分析

“双碳”背景下输变电工程规划、设计和建造过程绿色低碳评价研究服务

输变电工程绿色建造碳排放评价指标核算方法研究

电网基建项目碳排放核算标准研究

金建高速铁路环保集约型梁场建设综合技术应用研究

复杂高层玻璃幕墙设计、施工与运维过程中的数字化辅助方法

高性能安全夹层玻璃用PVE/SGE中间膜（胶片）材料特性研究

轨道交通设施数字化运维系统开发

玻璃幕墙面板表面损伤智能检测装置研发

医疗建筑智慧设计方法和平台开发

陶瓷粘结界面弯曲强度试验方法循环对比验证试验

BIM技术在预制混凝土建筑中的应用

幕墙玻璃在冲击作用下及破坏后安全性能实验研究

《特殊设施建设规范》专题研究

山东省职业教育工程造价专业教学资源库子项目—BIM技术模块建设

考虑连接体系劣化的幕墙玻璃动态特征和脱落风险评估

再生混凝土骨料的增强技术及在装配式建筑中的应用研究

大跨体育场馆钢屋盖结构的设计优化和分析研究

大型主题乐园工程建设管理模式研究

新型预制混凝土装配式110kV户内变电站建筑集成技术研究

《北京市农宅建设新体系及新技术应用示范图册》技术咨询服务

既有幕墙安全检测研发（第一期）

新一代绿色高性能混凝土及可循环装配结构（NPC）关键技术研发

竹质玩具研发基地厂房优化

22. 2012年前承担的项目
• 2007.07- 2010.06 英国EPSRC 与企业联合资助“新型低碳建筑结构的开发和应用”项目负责人
• 2008.07- 2011.06 英国EPSRC 与企业联合资助“新型轻钢结构的开发及轻钢设计新理论的研究“项目负责人
• 2010.09- 2011.09 英国结构工程师协会(IStructE)工程硕士(MEng)研究资助项目“低碳建筑结构服役检测“负责人
• 2011.09- 2012.09 英国结构工程师协会(IStructE)硕士(MSc)研究资助项目“玻璃结构的鲁棒性研究“负责人
• 2012.09- 2013.08 伯明翰铁路研究中心资助项目"再生骨料在无渣轨道板中的应用“负责人
• 2012.06- 2015.05 英国结构工程师协会(IStructE)研究资助项目"低碳混凝土在无渣轨道中的应用“合作负责人

英文论文 (updated on 01/04/2026)

1.     Li S, Sun Y, Zhang D, Chen W, Yang J, et al. Bio-inspired Bouligand Architectures Enable Biaxial Toughening and Programmable Energy Dissipation in 3D-Printed Strain-Hardening Cementitious Composites[J]. Cement and Concrete Composites, 2026: 106597.

2.     Lin K, Liu J, Nie K, Pang B, Wang F, Yang J. Engineering knowledge-constrained segmentation and geometric assessment of reinforcement cages from 3D point cloud[J]. Advanced Engineering Informatics, 2026;74:104640.

3.     Ahani E, Yang J, Ahani A. Structural glass health monitoring: A comparative evaluation of flaw detection approaches[J]. Composite Structures, 2026: 120072.

4.     Xie D, Yang J, Wang X-E, Wang Y, Yin J, Pan Z, et al. Temperature-dependent pre- and post-fracture performance of laminated glass with single/composite interlayers under out-of-plane loading. Structures 2026;87:111570.

5.     Ahani E, Yang J. Deep learning framework for crack type detection in laminated glass based on ultrasonic and modal analysis using finite element simulations[J]. Journal of Non-Crystalline Solids, 2026, 676: 123950.

6.     Li H, Xu W, Zhang C, et al. The road ahead in interfacial engineering of recycled fiber composites[J]. Composites Part B: Engineering, 2026, 317: 113613.

7.     Zhao C, Yang J, Wang Y, Xie D, Yin J, Wang X-E. Lifetime strength model for laminated glass plates based on modified stress-effective thickness. Thin-Walled Structures 2026, 226: 114859.

8.     Pan Z, Yang J, Wang X-E, Zhao C, Xie D. Safety performance assessment of scratched glass panels in a curtain wall system: Development of a vision-based framework[J]. Engineering Structures, 2026, 348: 121822.

9.     Lu M, Xu Q, Xie B, et al. Energy efficiency optimization of CdTe photovoltaic glass based on PAM/SA hydrogel[J]. Solar Energy, 2026, 305: 114211.

10.   Feng Y, Zhong H, Fang J, et al. NaHCO3 solution carbonation recycled powder for novel alkali-activated concrete: Synergistic enhancement in mechanical properties, durability, and environmental impact[J]. Cement and Concrete Composites, 2026, 167: 106465.

11.   Xie D, Wang X-E, Yang J, et al. Crack morphology effects on post-fracture tensile behavior of ionomer-laminated glass[J]. European Journal of Mechanics - A/Solids, 2026, 117: 106024.Xie D, Yang J, Wang X-E, et al. Temperature and time dependences of fragment generation and out-of-plane deformation in fractured tempered glass laminates[J]. Thin-Walled Structures, 2026, 218: 113959.

12.   Li J, Xie H, Zhang B, et al. Macro-Micro Characteristics of Eco-Friendly Geopolymer Incorporating Cement Paste Recycled Powder[J]. Journal of Materials in Civil Engineering, 2025, 37(11): 04025384.

13.   Nazar S, Iqbal M, Yang J, Ashraf M S, Hasan M U. Assessing the impact of acid and sulfate exposure on alkali-activated materials using metaheuristic machine learning[J]. Structural Concrete, 2025, 26(6): 7509-7535.

14.   Iqbal M, Nazar S, Yang J, Mahmoud H A. Integrated machine learning and response surface methodology for comprehensive rheological characterization of low-carbon binders[J]. Case Studies in Construction Materials, 2025, 22: e04475.

15.   Zhang P, Wen X, Fang J, Li Z, Pang B, Lu M, Yang J, Wang F. Structural collapse risk assessment of steel tube coupler scaffold based on BP neural network and sensor optimization[J]. Engineering Research Express, 2025, 7(2): 0252a8.

16.   Li H, Du Y, Yang J, et al. Synergistic nano-reinforcement in strain-hardening cement composites: Unlocking the potential of graphene oxide/carbon nanotube hybrids[J]. Composites Part A: Applied Science and Manufacturing, 2025: 109409.

17.   Li J, Xie H, Zhang B, et al. Macro–Micro Characteristics of Eco-Friendly Geopolymer Incorporating Cement Paste Recycled Powder[J]. Journal of Materials in Civil Engineering, 2025, 37(11): 04025384.

18.   Nazar S, Iqbal M, Yang J, et al. Machine Learning-Driven Evaluation of Carbon Emissions in Geopolymer Concrete[J]. Applied Soft Computing, 2025: 114017.

19.   Gao W Y, Lin J C, Hu K X, et al. Fire performance and post-fire residual behavior of insulated CFRP shear-strengthened RC beams: An experimental and numerical study[J]. Engineering Structures, 2025, 345: 121480.

20.   Li H, Zhang N, Yang J. Surface modification technologies for promoting the widespread use and recycling of carbon fibers in the construction industry[J]. The Innovation Materials, 2025, 3(3): 100149.

21.   Li H, Zhang N, Yang J, et al. Recycling of textile and fiber wastes as construction materials[G]//Wastes to Low-carbon Construction Materials. Woodhead Publishing, 2025: 521-560.

22.   Li H, Zhang N, Yang J, et al. From waste to worth: Biochar-hemp fiber synergy for carbon-sequestering, ultra-durable recycled aggregate concrete[J]. Resources, Environment and Sustainability, 2025: 100265.

23.   Nazar S, Iqbal M, Yang J, et al. Assessing the impact of acid and sulfate exposure on alkali‐activated materials using metaheuristic machine learning[J]. Structural Concrete, 2025:1-27

24.   Li H, Zhang N, Yang J, et al. Synergistic reinforcement of recycled carbon fibers and biochar in high-performance, low-carbon cement composites: a sustainable pathway for construction materials[J]. Cement and Concrete Composites, 2025: 106148

25.   Zhang A, Wang F, Li H, et al. A framework of carbon-negative rural housing renovation with novel heating methods and digital twin-based carbon emission monitoring[J]. Building and Environment, 2025, 282: 113158.

26.   Ahani E, Yang J, Ghannad S B. Exploring technological innovations in employing structural health monitoring for glass[J]. NDT & E International, 2025: 103418.

27.   Iqbal M, Nazar S, Yang J, et al. Integrated machine learning and response surface methodology for comprehensive rheological characterization of low-carbon binders[J]. Case Studies in Construction Materials, 2025, 22: e04475.

28.   Xiong Q, Tong L, Huang J, et al. Salt crystallization in porous materials: A quasi-local transport model for evaluating pore filling process[J]. Construction and Building Materials, 2025, 462: 139904.

29.   Li H, Zhang N, Wang L, et al. The challenge of recycling fast-growing fibre-reinforced polymer waste[J]. Nature Reviews Materials, 2025, 10(2): 81-82.

30.   Pang B, Wang F, Zhang A, et al. Stochastic analysis and machine learning techniques for maintenance of heritage buildings with multi-source data[J]. Journal of Building Engineering, 2025: 111998.

31.   Pang B, Yang J, Xia T, et al. Automated heritage building component recognition and modelling based on local features[J]. Journal of Cultural Heritage, 2025, 71: 252-264.

32.   Li H, Liebscher M, Yang J, et al. Influence of electrophoretic deposition of micro-or nanosized silica particles on the microstructure of carbon fibers and their bond behavior with cementitious matrices[J]. Materials and Structures, 2024, 57(5): 107.

33.   Li H, Yang J, Yang D, et al. Fiber-reinforced polymer waste in the construction industry: a review[J]. Environmental Chemistry Letters, 2024, 22(6): 2777-2844.

34.   Zhang A, Wang F, Li H, et al. Carbon emissions accounting and estimation of carbon reduction potential in the operation phase of residential areas based on digital twin[J]. Applied Energy, 2024, 376: 123155.

35.   Li H, Yang J, Wang L, et al.: Recycling of biomass combustion ash into SCMs and aggregates, Treatment and Utilization of Combustion and Incineration Residues: Elsevier, 2024: 269-295.

36.   Su Q, Fu G, Yang J, et al. Experiment and numerical analysis of prestressed unequal-walled rectangular concrete-filled steel box beams[J]. Scientific Reports, 2025, 15(1): 425.

37.   Zhang A, Zhou X, Wang F, et al. A multiobjective optimisation and display framework for time-cost-carbon emissions in building materialisation phase based on nD BIM concept[J]. Journal of Building Engineering, 2025: 111993.

38.   Huang H, Hu H, Xu F, et al. Electroencephalography-based assessment of worker vigilance for evaluating safety interventions in construction[J]. Advanced Engineering Informatics, 2025, 64: 102973.

39.   Li L, Mao L, Yang J. A Review of Principles, Analytical Methods, and Applications of SEM‐EDS in Cementitious Materials Characterization[J]. Advanced Materials Technologies, 2025, 10(7): 2401175.

40.   Nazar S, Yang J, Iqbal M, et al. Computational intelligence for modeling the rheological properties of the developed hydrated lime-based alkali-activated materials[J]. Materials Today Communications, 2024, 41: 110602.

41.   Ashraf M, Nazar S, Iqbal M, et al. Exploring the rheological and mechanical properties of alkali activated mortar incorporating waste foundry sand: A comprehensive experimental and machine learning investigation[J]. Results in Engineering, 2024, 24: 102973.

42.   Zhao L, Ding Z, Song C, et al. Analysis of lateral dynamic responses of end-bearing friction pipe pile considering the second-order effect[J]. Soil Dynamics and Earthquake Engineering, 2024, 186: 108942.

43.   Ahani E, Zhang Y, Wang F, et al. An overview of technological advancements in the application of structural health monitoring on glass elements[J]. Measurement Science and Technology, 2024, 35(5): 055008.

44.   Feng Y, Xue Z, Zhong H, et al. Improving geopolymer concrete performance with hazardous solid waste phosphogypsum[J]. Journal of Building Engineering, 2024, 95: 110333.

45.   Li L, Yang J. Image enhancement and microstructure characterization of energy dispersive X-ray spectroscopy images of blended cement pastes[J]. Expert Systems with Applications, 2024, 247: 123293.

46.   Pan Z, Yang J, Wang X-E, et al. Assessment on flexural performance of monolithic glass considering spatial and depth characteristics of scratches[J]. Engineering Fracture Mechanics, 2024, 300: 109964.

47.   Pan Z, Yang J, Wang X-E, et al. Scratch-induced micro-fracture behaviour and translational failure of glass: An experimental and numerical study[J]. Thin-Walled Structures, 2024, 205: 112341.

48.   Wang Y, Wang X-E, Yang J, et al. Experimental investigation into the expansion behaviour of thermally tempered laminated glass plates at asymmetric fracture[J]. Construction and Building Materials, 2024, 442: 137586.

49.   Xie J, Li J, Zhang B, et al. Effects of pretreated recycled fine aggregates on the mechanical properties and microstructure of alkali-activated mortar[J]. Case Studies in Construction Materials, 2024, 20: e02819.

50.   Xie D, Yang J, Zhao C, et al. Comprehensive investigation into the thermal rheological behavior and relaxation characteristic of single/composite polymers in laminated glass[J]. Thin-Walled Structures, 2024, 195: 111369.

51.   Li, L.; Yang, J.; Ding, S. Quantifying the phase assemblage in the hydrated cement paste by an interpretable and automatic EDS image analysis framework[J], Measurement  2023, 223: 113765.

52.   L. Li, J. Yang, H. Li, A comprehensive intelligent framework for interpreting and quantifying the microstructure of waste-derived alkali-activated materials: A case study of fly ash/slag pastes, Journal of Cleaner Production. 429 (2023) 139429.

53.   L. Li, J. Yang, W. Liu, P. Ren, Overview of the application of quantitative backscattered electron (QBSE) image analysis to characterize the cement-based materials, Construction and Building Materials. 406 (2023) 133332.

54.   L. Li, J. Yang, S. Ding, Quantifying the phase assemblage in the hydrated cement paste by an interpretable and automatic EDS image analysis framework, Measurement. 223 (2023) 113765.

55.   Nazar S, Yang J, Amin MN, Khan K, Javed MF, Althoey F. Formulation of estimation models for the compressive strength of concrete mixed with nanosilica and carbon nanotubes. Developments in the Built Environment 2023;13:100113.

56.   Li H, Wang L, Zhang Y, Yang J, Tsang DCW, Mechtcherine V. Biochar for sustainable construction industry. In: Ngo HH, Guo W, Pandey A, Varjani S, Tsang DCW, editors. Current Developments in Biotechnology and Bioengineering, Elsevier; 2023, p. 63–95.

57.   Li C, Shen H-S, Yang J. Nonlinear Vibration Behavior of FG Sandwich Beams with Auxetic Porous Copper Core in Thermal Environments. Int J Str Stab Dyn 2023;23:2350144.

58.   Wang X, Yousefi Kanani A, Gu Z, Yang J, Ye J, Hou X. Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model. Theoretical and Applied Fracture Mechanics 2023;124:103760.

59.   Nazar S, Yang J, Faisal Javed M, Khan K, Li L, Liu Q. An evolutionary machine learning-based model to estimate the rheological parameters of fresh concrete. Structures 2023;48:1670–83.

60.   Li L, Xie J, Zhang B, Feng Y, Yang J. A state-of-the-art review on the setting behaviours of ground granulated blast furnace slag- and metakaolin-based alkali-activated materials. Construction and Building Materials 2023;368:130389.

61.   Nazar S, Yang J, Ashraf M, Aslam F, Javed MF, Eldin SM, et al. Formulation and characterization of cleaner one-part novel fly ash/lime-based alkali-activated material. Journal of Materials Research and Technology 2023;23:3821–39.

62.   Zhang B, Feng Y, Xie J, Chen W, Xue Z, Zhao G, et al. Compressive behaviour and microstructures of concrete incorporating pretreated recycled powder/aggregates: The coupling effects of calcination and carbonization. Journal of Building Engineering 2023;68:106158.

63.   Nazar S, Yang J, Amin MN, Khan K, Ashraf M, Aslam F, et al. Machine learning interpretable-prediction models to evaluate the slump and strength of fly ash-based geopolymer. Journal of Materials Research and Technology 2023;24:100–24.

64.   Nazar S, Yang J, Wang X-E, Khan K, Amin MN, Javed MF, et al. Estimation of strength, rheological parameters, and impact of raw constituents of alkali-activated mortar using machine learning and SHapely Additive exPlanations (SHAP). Construction and Building Materials 2023;377:131014.

65.   Lang JP, Jiang W, Teng XC, Zhang XG, Han D, Hao J, et al. Assembled mechanical metamaterials with transformable shape and auxeticity. Construction and Building Materials 2023;378:131181.

66.   Nazar S, Yang J, Amin MN, Husnain M, Ahmad F, Alabduljabbar H, et al. Investigating the influence of PVA and PP fibers on the mechanical, durability, and microstructural properties of one-part alkali-activated mortar: An experimental study. Journal of Materials Research and Technology 2023;25:3482–95.

67.   Zhu Y, Yang J, Wang X, Xie D, Hou X. Morphological characterization and reconstruction of fractured heat-treated glass. Journal of Non-Crystalline Solids 2023;616:122455.

68.   Liu W-W, Ouyang L-J, Gao W-Y, Liang J, Wang T-C, Song J, et al. Repair of fire-damaged RC square columns with CFRP textile-reinforced ECC matrix. Engineering Structures 2023;292:116530.

69.   Li L, Yang J. Quantifying the microstructure evolution and phase assemblage of solid waste as construction materials by EDS image analysis: A case study of carbonated basic oxygen furnace slag aggregates. Construction and Building Materials 2023;393:131892.

70.   Bhatta S, Yang J, Liu Q-F. Numerical Modelling of Structural Behavior of RC Frames With and Without Infill Walls Subjected to Progressive Collapse. J Civ Eng Constr 2023;12:111–25.

71.   Chen F, Zhao J, Zhang B, Feng Y, Chen C, Lu Z, et al. Physical, mechanical and microstructural properties of ultra-lightweight high-strength geopolymeric composites. Case Studies in Construction Materials 2023;19:e02446.

72.   Li L, Yang J, Li H. Quantifying the microstructure and phase assemblage of alkali-activated fly ash/slag materials by EDS mapping analysis. Materials & Design 2023;234:112320.

73.   Nazar S, Yang J, Khan MS, Quazi MF, Li H, Rahim A. Investigating the effects of MWCNTs on sustainable alkali-activated mortar: physical, rheological, and mechanical analysis. Materials Today Sustainability 2023;24:100519.

74.   Feng Y, Li J, Zhang B, Fu H, Chen W, Xue Z, et al. Concrete improvement incorporating recycled powder and aggregates treated via a combination of calcination and carbonation: The impact behaviors. Journal of Cleaner Production 2023;418:138069.

75.   Li H, Yang J, Wang L, Li L, Xia Y, Köberle T, et al. Multiscale assessment of performance of limestone calcined clay cement (LC3) reinforced with virgin and recycled carbon fibers. Construction and Building Materials 2023;406:133228.

76.   Zhang A, Yang J, Wang F. Application and enabling technologies of digital twin in operation and maintenance stage of the AEC industry: A literature review. Journal of Building Engineering 2023:107859.

77.   Ghaemdoust MR, Yang J, Wang F, Li S, Jamhiri B. Performance assessment of post-tensioned concrete-filled steel tube beams using unbonded tendons with uncertainty quantification. Advances in Structural Engineering 2023.

78.   Zhang A, Yang J, Wang F, Ma X, Zhuang C, Qian X, et al. A framework of carbon emission comprehensive evaluation standard for operation and maintenance of parks. Civil Engineering and Energy-Environment Vol 2, CRC Press; 2023.

79.   Wang T-C, Gao W-Y, Liu W-W, Liang J, Yang J. Prediction of residual bond strengths between corroded steel bars and concrete after exposure to high temperatures. Engineering Fracture Mechanics 2023;283:109213.

80.   Yang J, Zhao C, Zhang Y, Wang X, Wang Y, Xie D. Constitutive models for temperature-, strain rate- and time-dependent behaviors of ionomers in laminated glass. J Mater Sci 2023;58:3608–24.

81.   Li H, Liebscher M, Zhao D, et al. A review of carbon fiber surface modification methods for tailor-made bond behavior with cementitious matrices[J]. Progress in Materials Science, 2023, 132: 101040.

82.   Wang X, Pang K, Huang X, et al. Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness[J]. Engineering Fracture Mechanics, 2023, 277: 108954.

83.   Li C, Shen H-S, Yang J. Design and nonlinear dynamics of FG curved sandwich beams with self-adapted auxetic 3D double-V meta-lattice core[J]. Engineering Structures, 2022, 272: 115023.

84.   Nazar S, Yang J, Ahmad W, et al. Development of the New Prediction Models for the Compressive Strength of Nanomodified Concrete Using Novel Machine Learning Techniques[J]. Buildings, 2022, 12(12): 2160.

85.   Ma Y, Zhang S Y, Yang J, et al. Neutron diffraction, finite element and analytical investigation of residual strains of autofrettaged thick-walled pressure vessels[J]. International Journal of Pressure Vessels and Piping, 2022, 200: 104786.

86.   Li H, Liebscher M, Ly K H, et al. Effect of electrophoretic deposition of micro-quartz on the microstructural and mechanical properties of carbon fibers and their bond performance toward cement[J]. Journal of Materials Science, 2022, 57(48): 21885–21900.

87.   Chen L, Yang J, Lu Q. Guest editorial: Digital innovation and transformation in built asset and facility management. JFM 2022;20:325.

88.   Xiong W, Xu X, Chen L, et al. Sound-Based Construction Activity Monitoring with Deep Learning[J]. Buildings, Multidisciplinary Digital Publishing Institute, 2022, 12(11): 1947.

89.   Wang X, Kanani A Y, Pang K, et al. A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives[J]. Thin-Walled Structures, 2022, 180: 109985.

90.   Wang X, Kanani A Y, Gu Z, et al. Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming[J]. International Journal of Adhesion and Adhesives, 2022, 118: 103230.

91.   Li L, Yang J, Li H, et al. Comparative Study on Backscattered Electron Image of Cement Paste Quantified by Frequency Histogram, Overflow and Gaussian Distribution Fitting Method[J]. Journal of Materials in Civil Engineering, 2022, 34(7): 04022124.

92.   Abdalla J A, Thomas B S, Hawileh R A, et al. Influence of nano-TiO2, nano-Fe2O3, nanoclay and nano-CaCO3 on the properties of cement/geopolymer concrete[J]. Cleaner Materials, 2022, 4: 100061.

93.   Wang T-C, Gao W-Y, Hu L-L, et al. Analytical Model for Predicting the Post-Fire Bond Behavior between Steel Bars and Concrete[J]. Construction and Building Materials, 2022, 343.

94.   Wang F, Shah S, Wang X, et al. Investigation of the Structural Behaviour of RC Beam-Column Sub-frame Subjected to Progressive Collapse[J]. KSCE Journal of Civil Engineering, 2022, 26(4): 1782–1792.

95.   Li H, Zhao D, Liebscher M, et al. An experimental and numerical study on the age depended bond-slip behavior between nano-silica modified carbon fibers and cementitious matrices[J]. Cement and Concrete Composites, 2022, 128: 104416.

96.   Skariah Thomas B, Yang J, Bahurudeen A, et al. Geopolymer concrete incorporating recycled aggregates: A comprehensive review[J]. Cleaner Materials, 2022, 3: 100056.

97.   Sadeghian M A, Yang J, Wang F, et al. Structural Vibration Control Using Novel Adaptive Tuned Mass Inertance Damper (ATMID) with Adjustable Inertance[J]. Applied Sciences, 2022, 12(8): 4028.

98.   Xia T, Yang J, Chen L. Automated semantic segmentation of bridge point cloud based on local descriptor and machine learning[J]. Automation in Construction, 2022, 133: 103992.

99.   Pang B, Wang F, Yang J, et al. Evaluation on the progressive collapse resistance of infilled reinforced concrete frames based on numerical and semi-analytical methods[J]. Engineering Structures, 2022, 267, 114684.

100. Nazar S, Yang J, Ahmad A, et al. Comparative study of evolutionary artificial intelligence approaches to predict the rheological properties of fresh concrete[J]. Materials Today Communications, 2022, 32, 103964.

101. Li L, Yang J, Shen X. Measuring the hydration product proportion in composite cement paste by using quantitative BSE-EDS image analysis: A comparative study[J]. Measurement: Journal of the International Measurement Confederation, 2022, 199, 111290.

102. Li H, Liebscher M, Yang J, et al. Electrochemical oxidation of recycled carbon fibers for an improved interaction toward alkali-activated composites[J]. Journal of Cleaner Production, 2022, 368, 133093.

103. Li H, Liebscher M, Micusik M, et al. Role of pH value on electrophoretic deposition of nano-silica onto carbon fibers for a tailored bond behavior with cementitious matrices[J]. Applied Surface Science, 2022, 600, 154000.

104. Li C, Yang J, Shen H-S. Postbuckling of pressure-loaded auxetic sandwich cylindrical shells with FG-GRC facesheets and 3D double-V meta-lattice core[J]. Thin-Walled Structures, 2022, 177, 109440.

105. Li C, Shen H-S, Yang J. Multi-scale modeling and numerical analysis of sandwich beams with FG auxetic 3D lattice cores and GRC face sheets subjected to drop-weight impacts[J]. Engineering Structures, 2022, 265, 114486.

106. Li C, Shen H-S, Yang J. Low-velocity impact response of cylindrical sandwich shells with auxetic 3D double-V meta-lattice core and FG GRC facesheets[J]. Ocean Engineering, 2022, 262, 112299.

107. Ghaemdoust M R, Yang J, Wang F, et al. Flexural behavior of prestressed concrete-filled steel tubular flange beams[J]. Structures, 2022, 43: 1643–1667.

108. Duan D, Ouyang L, Gao W, et al. Fire Performance of FRP-RC Flexural Members: A Numerical Study[J]. Polymers, 2022, 14(2), 346.

109. Chen L, Zhang Y, Wang L, et al. Biochar-augmented carbon-negative concrete[J]. Chemical Engineering Journal, 2022, 431, 133946.

110. Meng, Z., Liu, Q. F., She, W., Cai, Y., Yang, J., & Iqbal, M. F. Electrochemical deposition method for load-induced crack repair of reinforced concrete structures: A numerical study. Engineering Structures, 2021, 246, 112903.

111. Shaban, W. M., Elbaz, K., Yang, J., & Shen, S. L. A multi-objective optimization algorithm for forecasting the compressive strength of RAC with pozzolanic materials. Journal of Cleaner Production, 2021, 327, 129355.

112. Li, C., Shen, H. S., Yang, J., & Wang, H. Low-velocity impact response of sandwich plates with GRC face sheets and FG auxetic 3D lattice cores. Engineering Analysis with Boundary Elements, 2021, 132, 335-344.

113. Li, L., Yang, J., Li, H., & Du, Y. Insights into the microstructure evolution of slag, fly ash and condensed silica fume in blended cement paste. Construction and Building Materials, 2021,309, 125044.

114. Thomas, B. S., Yang, J., Bahurudeen, A., Abdalla, J. A., Haweeleh, R. A., Hamada, H. M., ... & Ashish, D. K. Sugarcane bagasse ash as supplementary cementitious material in concrete–A review. Materials Today Sustainability, 2021, 100086.

115. Yang, J., Wang, Y., Wang, X. E., Hou, X., Zhao, C., & Ye, J. Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions. Construction and Building Materials, 2022, 314: 125595.

116. Zhao, Chao-Wang; Yang, Jian; Li, Jia-Tong. Generation of Hospital Emergency Department Layouts Based on Generative Adversarial Networks. Journal of Building Engineering, 2021, 102539.

117. Bai, L., Wadee, M.A., Köllner, A., Yang, J. Variational modelling of local–global mode interaction in long rectangular hollow section struts with Ramberg–Osgood type material nonlinearity. International Journal of Mechanical Sciences, 2021, 209, 106691.

118. Hu, L., Ghafoori, E., Pons, S.,  Yang, J., Azim, I. Fire behavior and design of steel columns reinforced by prestressed CFRP strips. Composite Structures, 2021, 275, 114516.

119. Hu, L., Feng, P., Meng, Y., Yang, J. Buckling behavior analysis of prestressed CFRP-reinforced steel columns via FEM and ANN.Engineering Structures, 2021, 245, 112853.

120. Wang, F., Yang, J., Wang, X.-E., Azim, I. Study on progressive collapse behaviour of steel-framed substructures with sheathed CFS stud infill walls.Journal of Building Engineering, 2021, 42, 102720.

121. Pang, B., Wang, F., Yang, J., Nyunn, S., Azim, I. Performance of slabs in reinforced concrete structures to resist progressive collapse. Structures, 2021, 33, pp. 4843–4856.

122. Huang, X.-H., Wang, X.-E., Yang, J., ...Wang, F., Azim, I. Nonlinear analytical study of structural laminated glass under hard body impact in the pre-crack stage. Thin-Walled Structures, 2021, 167, 108137.

123. Wang, F., Han, Y., Yang, J. Nonlinear FE analysis on stiffness and resistance of bolted cold-formed steel built-up joints.Structures, 2021, 33, pp. 2520–2533.

124. Wang, X.-E., Huang, X.-H., Yang, J., ...Zhu, Y., Xie, D. Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact. International Journal of Mechanical Sciences, 2021, 206, 106613.

125. Jia, D.-G., Gao, W.-Y., Duan, D.-X., Yang, J., Dai, J.-G. Full-range behavior of FRP-to-concrete bonded joints subjected to combined effects of loading and temperature variation. Engineering Fracture Mechanics, 2021, 254, 107928.

126. Song, J., Gao, W.-Y., Ouyang, L.-J., ...Yang, J., Liu, W.-D. Compressive behavior of heat-damaged square concrete prisms confined with basalt fiber-reinforced polymer jackets. Engineering Structures, 2021, 242, 112504.

127. Zhao, C., Yang, J., Wang, X.-E., Ren, M., Azim, I. Investigation into short term behaviors of embedded laminated glass connections with various configurations. Construction and Building Materials, 2021, 297, 123687.

128. Chen, L., Xie, X., Lu, Q., ...Pitt, M., Yang, J. Gemini principles-based digital twin maturity model for asset management. Sustainability (Switzerland), 2021, 13(15), 8224.

129. Hamada, H.M., Thomas, B.S., Yahaya, F.M., ...Abdalla, J.A., Hawileh, R.A. Sustainable use of palm oil fuel ash as a supplementary cementitious material: A comprehensive review. Journal of Building Engineering, 2021, 40, 102286.

130. Fang, T., Zhao, Y., Gong, J., Wang, F., Yang, J. Investigation on maintenance technology of large-scale public venues based on bim technology. Sustainability (Switzerland), 2021, 13(14), 7937.

131. Ghaemdoust, M.R., Wang, F., Li, S., Yang, J. Numerical investigation on the transverse vibration of prestressed large-span beams with unbonded internal straight tendon. Materials, 2021, 14(9), 2273.

132. Li, B., Wang, J., Yang, J., Wang, Y. Probabilistic seismic performance evaluation of composite frames with concrete-filled steel tube columns and buckling-restrained braces. Archives of Civil and Mechanical Engineering, 2021, 21(2), 73.

133. Davoodabadi, M., Vareli, I., Liebscher, M., ...Cuniberti, G., Mechtcherine, V. Thermoelectric energy harvesting from single-walled carbon nanotube alkali-activated nanocomposites produced from industrial waste materials. Nanomaterials, 2021, 11(5), 1095.

134. Pan, Z., Yang, J., Wang, X.-E., Liu, J., Li, J. Surface Scratch Detection of Monolithic Glass Panel Using Deep Learning Techniques. Lecture Notes in Civil Engineering, 2021, 98, pp. 133–143.

135. Wang, X.-E., Meng, Y., Yang, J., Huang, X., Wang, F., Xu, H. Optimal kernel extreme learning machine model for predicting the fracture state and impact response of laminated glass panels. Thin-Walled Structures, 2021, 162, 107541.

136. Fu, G., Fu, G., Yu, C., Li, S., Wang, F., Yang, J. Behaviour of rectangular concrete-filled steel tubular slender column with unequal wall thickness. Engineering Structures, 2021, 236: 112100.

137. Shaban, W.M., Yang, J., Elbaz, K., Xie, J., Li, L. Fuzzy-metaheuristic ensembles for predicting the compressive strength of brick aggregate concrete. Resources, Conservation and Recycling, 2021, 169, 105443.

138. Iqbal, M. F., Javed, M. F., Rauf, M., Azim, I., Yang, J., Liu, Q. Sustainable utilization of foundry waste: Forecasting mechanical properties of foundry sand based concrete using multi-expression programming. Science of The Total Environment, 2021, 146524.

139. Ali Sadeghian, M., Yang, J., Wang, X.-E., Wang, F. Novel adaptive tuned viscous inertance damper (ATVID) with adjustable inertance and damping for structural vibration control. Structures, 2021, 29, 814–822.

140. Davoodabadi, M., Liebscher, M., Hampel, S., Sgarzi, M., Rezaie, A.B., Wolf, D., Cuniberti, G., Mechtcherine, V., Yang, J. Multi-walled carbon nanotube dispersion methodologies in alkaline media and their influence on mechanical reinforcement of alkali-activated nanocomposites. Composites Part B: Engineering, 2021, 209, 108559.

141. Azim, I., Yang, J., Iqbal, M.F., Mahmood, Z., Javed, M.F., Wang, F., Liu, Q.-F. Prediction of Catenary Action Capacity of RC Beam-Column Substructures under a Missing Column Scenario Using Evolutionary Algorithm. KSCE Journal of Civil Engineering, 2021, 25, 891–905.

142. Zhao, C., Yang, J., Xiong, W., Li, J. Two Generative Design Methods of Hospital Operating Department Layouts Based on Healthcare Systematic Layout Planning and Generative Adversarial Network. Journal of Shanghai Jiaotong University (Science) , 2021, 26, 103–115.

143. Zhang, H., Wang, F., Yang, J., Wang, X.-E. Evaluation on the behaviour of screwed CFS joints subjected to combined loading. Journal of Constructional Steel Research, 2021, 180, 106582.

144. Wang, X.-E., Yang, J., Pan, Z., Wang, F., Meng, Y., Zhu, Y. Exploratory investigation into the post-fracture model of laminated tempered glass using combined Voronoi-FDEM approach. International Journal of Mechanical Sciences, 2021, 190, 105989.

145. Huang, X.-H., Yang, J., Azim, I., Ren, X., Wang, X.-E. Static and dynamic analyses of auxetic hybrid FRC/CNTRC laminated plates. Nanotechnology Reviews, 2020, 9, 1625–1642.

146. Wang, X.-E., Yang, J., Huang, X., Wang, F., Zhu, Y. Voronoi-FDEM concept for modelling post-fracture response of progressively damaged structural glass. Engineering with Computers, 2021.

147. Liu, Q.-F., Iqbal, M.F., Yang, J., Lu, X.-Y., Zhang, P., Rauf, M. Prediction of chloride diffusivity in concrete using artificial neural network: Modelling and performance evaluation. Construction and Building Materials, 2021, 268, 121082.

148. Pan, Z., Yang, J., Wang, X.-E., Wang, F., Azim, I., Wang, C. Image-based surface scratch detection on architectural glass panels using deep learning approach. Construction and Building Materials, 2021, 282, 122717.

149. Shaban, W.M., Elbaz, K., Yang, J., Thomas, B.S., Shen, X., Li, L., Du, Y., Xie, J., Li, L. Effect of pozzolan slurries on recycled aggregate concrete: Mechanical and durability performance. Construction and Building Materials, 2021, 276, 121940.

150. Thomas, B.S., Yang, J., Mo, K.H., Abdalla, J.A., Hawileh, R.A., Ariyachandra, E. Biomass ashes from agricultural wastes as supplementary cementitious materials or aggregate replacement in cement/geopolymer concrete: A comprehensive review. Journal of Building Engineering, 2021, 40, 102332.

151. Chen, L., Lu, Q., Li, S., He, W., Yang, J. Bayesian Monte Carlo Simulation–Driven Approach for Construction Schedule Risk Inference. Journal of Management in Engineering, 2021, 37, 04020115.

152. Fu, G., Fu, G., Li, S., Yang, J., Wang, F. Investigations into structural behavior of concrete-filled rhs columns with unequal flange thickness under compressive load. Materials, 2020, 13(23), 5463.

153. Nazar, S., Yang, J., Thomas, B. S., Azim, I., Rehman, S. Rheological properties of cementitious composites with and without nano-materials: A comprehensive review. Journal of Cleaner Production, 2020, 272, 122701.

154. Huang, X.-H., Yang, J., Wang, X.-E., Azim, I. Combined analytical and numerical approach for auxetic FG-CNTRC plate subjected to a sudden load. ENGINEERING WITH COMPUTERS, 2020.

155. Jian, Y., Wafaa, M.S., Khalid, E., Blessen, S.T., Xie, J.X., Li, L.J. Properties of concrete containing strengthened crushed brick aggregate by pozzolan slurry. CONSTRUCTION AND BUILDING MATERIALS, 2020, 10, 118612.

156. Wang, L., Chen, L., Tsang, D., Guo, B., Yang, J., Shen, Z., Hou, D., Yong, S., Chi, S. Biochar as green additives in cement-based composites with carbon dioxide curing, 2020, 258, 120678.

157. Julian, W., Gao, W., Yang, J. Effect of temperature variations on interfacial debonding of FRP-plated beams: A coupled mix-mode cohesive zone modelling. Materials Science and Engineering, 2020, 33, 12003.

158. Wang, F., Yang, J., Azim, I., Li, B., Ma, Y. Experimental and numerical evaluations of the distribution and effect of roll-forming residual stress on CFS sigma beams. Journal of Constructional Steel Research, 2020, 7, 105978.

159. Azim, I., Yang, J., Javed, M.F., Iqbal, M.F., Mahmood, Z., Wang, F., Liu, Q.-F. Prediction model for compressive arch action capacity of RC frame structures under column removal scenario using gene expression programming. Structures, 2020, 25, 212-228.

160. Wang, F., Yang, J., Lim, J.B.P. Pseudo-plastic Collapse Performance of Multi‐span Continuous Beams with CFS Sigma Sections: A Numerical Study. International Journal of Steel Structures, 2020, 1, 600-611.

161. Li, H., Liebscher, M., Curosu, I., Choudhury, S., Hempel, S., Davoodabadi, M., Dinh, T.T., Yang, J., Mechtcherine, V. Electrophoretic deposition of nano-silica onto carbon fiber surfaces for an improved bond strength with cementitious matrices. Cement and Concrete Composites, 2020, 114, 103777.

162. Hu, Y., Yang, J., Baniotopoulos, C. Study of the Bearing Capacity of Stiffened Tall Off-shore Wind Turbine Towers during the Erection Phase. Energies 2020, 13, 5102.

163. Huang, X.-H., Yang, J., Wang, X.-E., Azim, I. Combined analytical and numerical approach for auxetic FG‑CNTRC plate subjected to a sudden load. Engineering with Computers https://doi.org/10.1007/s00366-020-01106-8.

164. Shah, S.N., Mo, K.H., Yap, S.P., Yang, J., Ling, T.-C. Lightweight foamed concrete as a promising avenue for incorporating waste materials: A review. Resources, Conservation and Recycling, 2021, 164, 105103.

165. Hamada, H.M., Skariah Thomas, B., Tayeh, B., ...Muthusamy, K., Yang, J. Use of oil palm shell as an aggregate in cement concrete:  A review. Construction and Building materials,  2020,  265, 120357.

166. Wang, X.-E., Yang, J., Chong, W.T.A., Peng, S., Huang, X. Post-fracture performance of laminated glass panels under consecutive hard body impacts. Composite Structures, 2020, 254, 112777.

167. Huang, X.-H., Yang, J., Bai, L., Wang, X.-E., Ren, X.Theoretical solutions for auxetic laminated beam subjected to a sudden load. Structures, 2020, 28, pp. 57-68.

168. Nyunn, S., Wang, F., Yang, J.,  Azim, I., Bhatta, S. Numerical studies on the progressive collapse resistance of multi-story RC buildings with and without exterior masonry walls. Structures, 2020, 28, 1050-1059.   

169.

170. Hu, Y., Yang, J., Baniotopoulos, C., Wang, X., Deng, X. Dynamic analysis of offshore steel wind turbine towers subjected to wind, wave and current loading during construction. Ocean Engineering, 2020, 216, 108084.

171. Du, Y., Yang, J., Skariah T, B., Shaban, W. M., Wang, T.  Influence of hybrid graphene oxide/carbon nanotubes on the mechanical properties and microstructure of magnesium potassium phosphate cement paste. Construction and Building Materials, 2020, 260, 120449.

172. Wang, F., Yang, J., Nyunn, S., Azim, I. Effect of concrete infill walls on the progressive collapse performance of precast concrete framed substructures. Journal of Building Engineering, 2020, 32, 101461.

173. Azim, I., Yang, J., Iqbal, F, M., Wang, F., Liu, Q.-F. Semi-analytical model for compressive arch action capacity of RC frame structures. Structures, 2020, 27, 1231-1245

174. Huang, X., Yang, J., Azim, I., Wang, X., Ren, X. Geometric non-linear analysis of auxetic hybrid laminated beams containing CNT reinforced composite materials. Materials, 2020, 13(17), 3718.

175. Nazar, S, Yang, J, Su, H, Thomas, B, S. 2020. Rheological properties of cementitious composites containing nano-materials: A comprehensive review. Journal of Cleaner Production.  272, 122701.

176. Du, Y, Yang, J, Thomas, B.S., Li, L. H, Li, H., Nazar, S. 2020. Hybrid graphene oxide/carbon nanotubes reinforced cement paste: An investigation on hybrid ratio. Construction and Building Materials. 261, 119815.

177. Azim, I, Yang, J, Iqbal, F, Javed, M.F., Nazar, S., Wang, F, Liu, Q. F. 2020. Prediction of the Compressive Arch Action Capacity of RC Frame Structures Using Modified Park & Gamble Model. Structures.

178. Meng, Y, Wang, X, Yang, J. Xu, H. Yue, F. Research on Machine Learning Based Model for Predicting the Impact Status of Laminated Glass. Journal of Inorganic Materials. DOI:10.15541/jim20200187

179. Hu, Y. Yang, J Baniotopoulos, C. 2020. Repowering steel tabular wind turbine towers enhancing them by internal stiffening rings. Energies, 13, 1538, 1-23.

180. Hu, Y. Yang, J. Baniotopoulos, C. 2020. A comparison of structural performance enhancement of horizontally and vertically stiffened tubular steel wind turbine towers. Structural Engineering and Mechanics, 73 (5), 487-500.

181. Yang, J. Huan, X. H. Shen, H.S. 2020. Nonlinear vibration of temperature-dependent FG-CNTRC laminated beams with negative Poisson’s ratio. International Journal of Structural Stability and Dynamics, 2050043-1.

182. Wang, F. Yang, J. Iftikhar, A. Bai, L. Ma, Y. 2020. Experimental and numerical evaluations of the distribution and effect of roll-forming residual stress on CFS sigma beams. Journal of Constructional Steel Research. 167,

183. Wang, F. Yang, J. Pan, Z. 2020. Progressive collapse behaviour of steel framed substructures with various beam-column connections. Engineering Failure Analysis, 2020, 109, 104399.

184. Wang, J. Xie, J. He, J. Sun, M. Yang, J. Li, L. 2020. Combined use of silica fume and steel fibre to improve fracture properties of recycled aggregate concrete exposed to elevated temperate. Journal of Material Cycles and Waste Mangement.

185. Yang, J. Shaban, W. M. Elbaz, K. Thomas, B. S, Xie, J. Li, L. Properties of concrete containing strengthened crushed brick aggregate by pozzolan slurry. Construction and Building Materials 247. 2020. 118612.

186. Azima, I. Yang, J. Faved, M. F., Iqbal, M. F. Mohamood, Z. Wang, F. Liu, Q-F. Prediction model for compressive arch action capacity of RC frame structures under column removal scenario using gene expression programming. Structures (25) 212-228, 2020.

187. Wang, L. Chen, L. Tsang, D. C.M. Guo, B. Yang, J. Shen, Z. Hou, D. Ok, Y.S. Poon, C.S. Biochar as green additives in cement-based composites with carbon dioxide curing. Journal Cleaner Production. 2020, 258, 120679.

188. Wang F. Yang, J. Shah, S. Effect of Horizontal restraints on progressive collapse resistance of precast concrete beam-column framed substructures. KSCE Journal of Civil Engineering 2020: 24(145). DOI 10.1007/s12205-020-1035-9

189. Shen H.S., Huang, X. H. Yang, J. Nonlinear bending of temperature-dependent FG-CNTRC laminated plates with negative Poisson’s ratio. Journal of Mechanics of Advanced Materials and Structures. 2020. 27(13), pp. 1141-1153.

190. Yang, J. Huang, X.H. Shen H.S. Nonlinear flexural behaviour of temperature-dependent FG-CNTRC laminated beams with negative Poisson’s ratio resting on the Pasternak Foundation. Engineering Structures, 2020: 207 (110250).

191. Wang, F. L, Yang, J. Lim, J.B.P. 2020 Pseudo-plastic collapse performance of multi-span continuous beams with CFS sigma sections: a numerical study. International Journal of Steel Structures. /doi.org/10.1007/s13296-020-00309-5.

192. Liu, Q.F. Hu, Z, Lu, X. Y. Yang, J. Azim, I. Sun, W. 2020. Prediction of chloride distribution for offshore concrete based on statistical analysis. Materials, 2020 (13), 174. Open access, doi:10.3390/ma13010174.

193. Yang, J. Huang, X. Shen, H-S. 2020. Nonlinear vibration of temperature-dependent FG-CNTRC laminated plates with negative Poisson's ratio, 2020. Thin Walled Structures. Thin–Walled Structures, 148, 106514.

194. Azim, I., Yang, J. Bhatta, S. Wang, F. Liu, Q-F. Factors influencing the progressive collapse resistance of RC frame structures. Journal of Building Engineering, 2020, 7, 100986. 

195. Wang, F., Yang, J. 2020. Experimental and numerical investigations on  load-carrying capacity of dowel-type bolted bamboo joints. Engineering Structures. Engineering Structures,  209, 109952.

196. Lu, X. Yang, J. Su, H. Wang, F. Experimental investigations on performance of polypropylene fibre reinforced recycled aggregate concrete. Concrete, 2019.

197. Li, B, Wang, J. Yang, J. Baniotopoulos, C. Seismic design and pseudo-dynamic tests of blind-bolted CFT frames with buckling-restrained braces. JCSR, 2020.

198. Huang, X. Bai, L, Yang, J. Wang, F-L. Zhu, J. Liu, Q-F. Distortional-buckling analysis of channel sections with web stiffened by longitudinal ribs subjected to axial compression or bending. Thin-walled Structures, 144 (2019), 1063

199. Zhao, C. Yang, J. Wang, X-e, Azim, I. Experimental investigation into the post-breakage performance of pre-cracked laminated glass plate. Construction and Building Materials. 224, 2019, 996-1006.

200. Li, B, Wang, J. Yang, J. Pan, X. Baniotopoulos, C.C. Pseudo-dynamic response and analytical evaluation of blind bolted CFT frames with BRBs. JCSR, 2019.

201. Shen, X-H, Jiang, W-Q, Hou, D-S. Hu, Z. Yang, J. Liu, Q-F. Numerical study of carbonation and its effect on chloride binding in concrete. CCC, 2019.

202. Iqbal, M. Liu, Q-F, Azim, I, Zhu, X, Yang, J. Jayed, M. Rauf, M. Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming. Journal of Hazardous Materials. 2020, 384, 121322.

203. Lu, Y-H, Yang, J. Wang, F-L. Liu, Q-F. Experimental Investigation on the Composite Beams Strengthened with CFRP Sheets. GFRP/Composite Materials, 2019, 2, 13-19.

204. Wang, L, Chen, L, Tsang, D.C.W., Kua, H. W., Yang, J. Ok, Y.S., Ding, S. Hou, D, Poon, C.S. The role of biochar as green admixture for sediment-based construction products. Cement and Concrete Composite, 104 (2019), 1033-1048.

205. Shaban, W. M., Yang, J., Su, H., Liu, Q-F., Tsang, D., C., Wang, L., Xie, J., Li, L., 2019. Properties of recycled concrete aggregates strengthened by different types of pozzolan slurry. Construction and Building Materials 216, 632-647.

206. Wafaa Mohamed Shaban, Jian Yang, Haolin Su, Kim Hung Mo, Lijuan Li and Jianhe Xie. 2019. Quality Improvement Techniques for Recycled Concrete Aggregate: A review. Journal of Advanced Concrete Technology. 17, 151-167.

207. Liang Chen , Lei Wang , Dong-Wan Cho, Daniel C.W. Tsang ,  Lizhi Tong, Yaoyu Zhou, Jian Yang , Qing Hu, Chi Sun Poon. 2019. Sustainable stabilization/ solidification of municipal solid waste incinerator fly ash by incorporation of green materials. Journal of Cleaner Production 222, 335-343.

208. Xiaoni Wu, Yu Hu, Ye Li, Jian Yang, Lei Duan, Tongguang Wang,Thomas Adcock, Zhiyu Jiang, Zhen Gao, Zhiliang Lin, Alistair Borthwick, Shijun Liao. 2019. Foundations of offshore wind turbines: A review. Renewable and Sustainable Energy Reviews. 104, 379-393.

209. Lei Wang, Liang Chen, Dong-Wan Cho, Daniel C.W. Tsang, Jian Yang, Deyi Hou, Kitae Baek, Harn Wei Kua, Chi-Sun Poon. 2019. Novel synergy of Si-rich minerals and reactive MgO for stabilisation/ solidification of contaminated sediment. Journal of Hazardous Materials. (365). P695-706.

210. Li-xuan Mao, Zhi Hu, Jin Xia, Gan-lin Feng, Iftikhar Azim, Jian Yang, Qing-feng Liu. 2019. Multi-phase modelling of electrochemical rehabilitation for ASR and chloride affected concrete composites. Composite Structures. (207). P176-189.

211. Xing-er Wang, Jian Yang, Qiang Liu, Chenjun Zhao. 2018. Experimental investigations into SGP laminated glass under low velocity impact. International Journal of Impact Engineering. (122). P91-108.

212. Xing-er Wang, Jian Yang, Feiliang Wang, Qing-feng Liu, Han Xu. 2018. Simulating the impact damage of laminated glass considering mixed mode delamination using FEM/DEM. Composite Structures. (202). P1239-1252.

213. Mohammad Ali Y, Marco L, Simone H, Jian Yang, Viktor M. 2018. Correlation of microstructural and mechanical properties of geopolymers produced from fly ash and slag at room temperature. Construction and Building Materials. (191). P330-341.

214. Li Bai, Jian Yang, M. Ahmer Wadee. 2018. Cellular buckling from nonlinear mode interaction in unequal-leg angle struts. Thin-Walled Structures. (132). P316-331.

215. Feiliang Wang, Hanwen Zhang, Jian Yang, Li Bai, Chong Ren. 2018. Numerical Studies of the Rotational Stiffness of Purlin–Sheeting System. International Journal of Steel Structures. 18(3). P719-733.

216. Xu-hao Huang, Jian Yang, Qing-feng Liu, Jue Zhu, Li Bai, Fei-liang Wang. 2018. A simplified flange–lip model for distortional buckling of cold-formed steel channel-sections with stiffened web. International Journal of Mechanical Sciences. (136). P451-459.

217. Zhang Yang-mei, Wang Xing-er, Yang Jian, Liu Qing-feng, Liu Xin-wei. 2018. Experimental study of multiple layered SGP laminated glass under hard body impact. Journal of Inorganic Materials, 33(10), 1110-1118.

218. Tao He, Jian Yang, Charalampos Baniotopoulos. 2018. Improving the CBS-based partitioned semi-implicit coupling algorithm for fluid-structure interaction. Int J Numer Meth Fluids. P463-486.

219. Mohammad T Kazemi, Mahdi Sharifi, Jian Yang. 2018. Mechanism analysis of steel frames considering moment–shear interaction. Advances in Structural Engineering. P1-14.

220. Qing-feng Liu, Gan-lin Feng, Jin Xia, Jian Yang, Long-yuan Li. 2018. Ionic transport features in concrete composites containing various shaped aggregates: a numerical study. Composite Structures. (183). P371-380.

221. Zhi Hu, Li-xuan Mao, Jin Xia, Jiang-bin Liu, Jun Gao, Jian Yang, Qing-feng Liu. 2018. Five-phase modelling for effective diffusion coefficient of chlorides in recycled concrete. Magazine of Concrete Research. 70(11). P583-594.

222. Wen-qiang Jiang, Xiao-han Shen, Jin Xia, Li-xuan Mao, Jian Yang, Qing-feng Liu. 2018. A numerical study on chloride diffusion in freeze-thaw affected concrete. Construction and Building Materials. (179). P553-565.

223. Bai, L. Wang, F. Wadee, M.A. Yang, J. Nonlinear mode interaction in equal-leg angle struts susceptible to cellular buckling. Proceedings of the Royal Society A, 273 (2207), 2017, https://dx.doi.org/10.6084/m9.figshare.c.3906091.

224. Wang, X, Yang, J, Liu Q. A comparative study of numerical modelling techniques for the fracture of brittle materials with specific reference to glass. Engineering Structures, 152, 2017, 493-505.

225. Du Q. Sun, Q. Lv, J. Yang, J. Use of preplaced casting method in lightweight aggregate concrete. Advances in Materials Science and Engineering. 2017, https://doi.org/10.1155/2017/7234761.

226. Chen, X, Chan, AHC, Yang, J. Simulating the breakage of glass under hard body impact using the combined finite-discrete element method. Computers and Structures 177, 2016, 56-68.

227. Wang, X, Yang J, Wang, T. Xiong, W. Evaluation of DEM and FEM/DEM in modelling the fracture process of glass under hard-body impact. Springer Proceedings in Physics 188, 2017, 377–388.

228. Miyandehi, B, M. Feizbakhsh, A. Yazdi, M A. Liu Q F. Yang, J. Performance and properties of motar mixed with nano-Cuo and rice husk  ash. Cement and Concrete Compsoites 74, 2016, 225-235.

229. Sadeghian, M. A. Yang, J. Liu, Q. F. Numerical analysis of end plate bolted connection with corrugated beam. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 9 (12), 2015, 1416-1420.

230. Yazdi, M. A. Yang, Yihui, L. Su, H. A review on application of waste tire in concrete. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 9(12), 2015, 1580-1585.

231. Aghaee, K, Yazdi, M A, Yang, J. Flexural properties of composite gypsum partition panel. Proceedings ICE, Engineering Sustainability, 2015， 168(6), 258-263.

232. Minxi Bao, Jian Yang, Feng Xu, Andrew H.C. Chan, Yan Qiu. Contact damage of vacuum glazing units due to supporting pillars. Engineering Structures 2016， in press.

233. Liu, Q. Yang, J. F.L. Wang.  Numerical simulation of sleeve connections for cold formed steel sigma sections. Engineering Structures, 2015. 100, 686-695.

234. Yang J. , Mohseni E., Behforouz B., Khotbehsara M. M. An experimental investigation into the effects of Cr2O3 and ZnO2 nanoparticles on the mechanical and durability properties of self-compacting mortar. International Journal of Materials Research 2015; 106, 1-7. DOI 10.3139/146.111245.

235. Mohseni E., Miyandehi B.M. Yang, J, Yazdi M. Single and combined effects of nano-SiO2, nano-Al2O3 and nano-TiO2 on the mechanical, rheological and durability properties of self-compacting mortar containing fly ash. Building and Construction Materials 2015.  84: 331-340.10.1016/j.conbuildmat.2015.03.006.

236. Liu, Q.F,  Easterbrook D,  Yang J. ,  Li L.Y. A three-phase, multi-component ionic transport model for simulation of chloride penetration in concrete. Engineering Structures 86 (2015) 122–133.

237. Liu Q.F, Yang J, Xia J,  Easterbrook D,  Li L.Y,  Lu Y. A numerical study on chloride migration in cracked concrete using multi-component ionic transport models. Computational Materials Science. Computational Materials Science 03 (2015) 99:396–416. DOI:10.1016/j.commatsci.2015.01.013 

238. Tohidi M, Yang J,  Baniotopoulos C. An Improved Tie Force Method for Progressive Collapse Resistance of Precast Concrete Cross Wall Structures. International Journal of Civil, Architectural Science and Engineering 2014; 8; 1-8.

239. Yazdi, M. A. Motaghi, S, Yang, J. The Effect of concrete containing recycled concrete aggregate and crushed clay bricks on slab under dynamic loading. Key Engineering Materials, 629-630: 330-336, 2015.

240. Qapo, M. Dirar, S. Yang, J. Nonlinear finite element modelling and parametric study of shear-strengthened prestressed concrete girders. Construction & Building Materials 76 (2015); 245–255.

241. Qin, S.D. Dirar, S. Yang, J. CFRP  shear strengthening of reinforced concrete T-beams with corroded shear links. Journal of Composites for Construction, 2015. 19(5) DOI: 10.1061/(ASCE)CC.1943-5614.0000548 .

242. Su, H.L. Yang, J. Properties of concrete prepared with waste tyre rubber particles of uniform and varying sizes. Journal of Cleaner Production, 91, 2015, 288–296.

243. Rungthonkit, P. and Yang, J. Structural behaviour of Structural Insulated Panels (SIPs).  Proceedings of the Institution of Civil Engineers, Structures and Buildings. 2016.

244. Su, H.L. Yang, J. Ghataora, G. Dirar, S. Surface modified used rubber tyre aggregates: effect on recycled concrete performance. Magazine of Concrete Research. 2015, 67(11), 680-691. http://dx.doi.org/10.1680/macr.14.00255

245. Bao, M. Yang, J. Xu, F. Chan, A.H.C. Optimisation of supporting pillars in vacuum glazing units. Engineering Structures, 2019.

246. Bao, M.X. Liu, X. Yang, J. Bao, Y. Novel hybrid vacuum/triple glazing units with pressure equalisation design.  Construction and Building Materials, 2014, 73, 645-651. (Most downloaded paper in 2015)

247. Hu. Y., Baniotopoulos, J, Yang, J. Effect of internal stiffening rings and wall thickness on the structural response of steel wind turbine towers. Engineering Structures, 81: 148-161, 2014.

248. Tohidi, M. Yang, J. Baniotopoulos, C. Numerical evaluation of codified design methods for progressive collapse resistance of precast concrete cross wall structures. Engineering Structures. 76: 177-186, 2014.

249. Liu, Q. Xia, J. Easterbrook, D. Yang, J. Three-phase modelling of electrochemical chloride removal from corroded steel-reinforced concrete. Construction and Building Materials. 70: 410-427, 2014.

250. Zhao, C. Yang, J. Wang, F. Chang, A.H.C. Rotational stiffness of cold-formed steel roof purlin-sheeting connections. Engineering Structures. 59: 284-297, 2014. (most downloaded paper)

251. Chen, X. D. Chan A.H.C. Yang, J. FEM/DEM modelling of hard body impact on the laminated glass. Applied Mechanics and Materials 2014, 553, 786-791.

252. Li, H. Chen, J. Yang, J. Experimental and numerical simulation on delamination during the laminated steel sheet forming process. International Journal of Advanced Manufacture Technology. 68: 641-649, 2013.

253. Kang, J., Wang, X., Yang, J. and Du, Y. Strengthening double curved arch bridges by using extrados section augmentation method.   Construction and Building Materials. 41， 165-174， 2013.

254. Yang, J. Liu, Q. An Experimental Study into the Flexural Behaviour of Sigma Purlins Attached with Roof Sheets. Engineering Structures, 45, 481-495, 2012.

255. Yang, J. Liu, Q. Sleeve Connections of Cold-formed Steel Sigma Purlins. Engineering Structures, 43, 2455-258, 2012.

256. Liu, Q. F., Li, L. Y. Easterbrook, D. and Yang, J. Multi-phase modeling of ionic transport in concrete when subjected to an externally applied electric field. Engineering structures, 42, 201-213, 2012.

257. Li H, Chen, J. and Yang J. Experimental and numerical investigation of laminated steel sheet in V-bending process considering nonlinear visco-elasticity of polymer layer. Journal of Materials Processing Technology. 212(1), 36-45, 2012.

258. Ren C., Li L. Y. and Yang J. Bending analysis of partially restrained channel-section purlins subjected to up-lift loadings. Journal of Constructional Steel Research, 72, 2012, 254-260.

259. Yang, J. Li, Z. and Du. Q. An experimental study on material and structural properties of structural insulated panels (SIPs). Applied Mechanics and Materials 147, 127-131, 2012.

260. Ren, C. Li. L-Y., and Yang, J. Theoretical analysis of partially restrained zed-purlin beams subjected to up-lift loads.  Journal of Constructional Steel Research 70, 273-279, 2011.

261. Liu, Q. Yang, J. Chan A. H. and Li. L-Y.   Pseudo-plastic Moment Resistance of Continuous Beams with Cold-formed Sigma Sections at Internal Supports: A Numerical Study. Thin Walled Structures 49 (12), 1592-1604, 2011.

262. Du, Q. Yang, J. and Ledbetter, S. Communication in the cladding supply chain. Advanced Materials Research 255-260, 3898-3902, 2011.

263. Du, Q. Yang, J. and Zhou, T-H. Decision making on glass selection in building Façades. Advanced Materials Research 250-253, 2792-2795, 2011.

264. Liu, Q., Yang, J. and Li L-Y. Pseudo-plastic moment resistance of continuous beams with cold-formed Sigma Sections at Internal Supports: An experimental study. Engineering Structures 33 (3), 947-957, 2011. 

265. Yang, J., Du, Q, Bao, Y.W.  Concrete with recycled concrete aggregate and crushed clay bricks. Construction and Building Materials 25 (4), 1935-1945, 2011.

266. Yang, J. Du, Q. and Bao, Y. W. Bond behaviour of concrete block including steel mesh of various rib pattern and bar size. Advanced Materials Research 177, 562-565, 2011.

267. Yang, J. and Ye, J. An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach. International Journal of Mechanical Sciences 52 (1), 13-30, 2010.

268. Al-Sarraf, S.Z. Yang, J. Kadhum, A.F. Behaviour of short span composite beams strengthened with CFRP strips. Eng. and Tech. Journal, 28(1): 103-118, 2010.

269. Yang, J. Chen, J.F. Teng., J.G. Interfacial stress analysis of plated beams under symmetric mechanical and thermal loading. Construction and Building Materials 23(9), 2973-2987, 2009.

270. Bao, Y., Yang, J. Space and time effect of stress on cracking of glass. Materials Science and Engineering A – Structural materials properties, Microstructure and Processing 512 (1-2), 45-52, 2009. 

271. Yang, J., Ye, J. and Bao Y. Stress analysis of cross-ply composite laminates with transverse cracks. Mechanics of Composite Materials 44(6), 557-580, 2008.

272. Yang, J., Ye, J.  Niu, Z. Simplified solutions for the stress transfer in concrete beams bonded with FRP plates. Engineering Structures 30(2), 533-545,2008.

273. Yang, J., Ye, J. Niu, Z. Interfacial shear stress in FRP-plated RC beams under symmetric loads, Cement & Concrete Composites 29(2), 421-432, 2007.

274. Yang, J. and Ye,  J. Bending, buckling and vibration of plates strengthened with bonded composite sheets. World Journal of Engineering 2(2), 33-42, 2005.

275. Yang, J., Teng, J.G. and Chen, J.F. Interfacial stresses in soffit-plated reinforced concrete beams. Proceedings of the Institution of Civil Engineers  - Structures and Buildings, 157 (1), 77-89, 2004.

276. Shen, H.S., Chen, Y. and Yang, J. Bending and vibration characteristics of a strengthened plate under various boundary conditions. Engineering Structures, 25(9): 1157-1168, 2003.

277. Yang, J. and Ye, J.Q. Interfacial stresses in plated beams with cracks. Composite Structures 57 (1-4),125-134, 2002.

278. Yang J. and Ye J.Q. Dynamic elastic local buckling of piles under impact loads. Structural Engineering and Mechanics13(5), 543-556, 2002.

279. Shen, H.S., Teng J.G. and Yang J. Interfacial Stresses in Beams and Slabs Bonded with Thin Plate. Journal of Engineering Mechanics, ASCE 127 (4), 399-406, 2001.

280. Zhang, L. Shen, H.S. and Yang, J., Flow-induced vibrations of shear-deformable laminated plates exposed to an oscillating flow. Journal of Sound and Vibration 245(1), 29-44, 2001.

281. Shen, H.S., Yang, J. and Zhang, L. Free and forced vibration of Reissner-Mindlin plates with free edges resting on elastic foundations. Journal of Sound and Vibration 244(2), 299-320, 2001.

282. Shen, H.S., Yang, J. and Zhang, L. Dynamic response of Reissner-Mindlin plates under thermomechanical loading and resting on elastic foundations. Journal of Sound and Vibration 232(2), 309-32, 2000.

二、中文或会议论文

1.  Dong Z, Jia L, Nie K, Zhang H, Zhang A, Lin K, Liang J, Yang J. Smart Manufacturing in Precast Concrete Plants: Advances, Challenges, and Future Directions[C]//Proceedings of the 13th Academic Conference of Geology Resource Management and Sustainable Development, GRMSD 2025. 2025, 3: 1632-1642.

2.  Yuan E, Cheng H, Zhou Q, et al. Study on motion pattern recognition of crane boom in construction process based on 3DResNet[C]. Proceedings of SPIE, 2026, 14128: 141284N.

3.  Nie K, Shou J, Lin K, Yang J, Wang F. Intelligent detection and accuracy analysis of precast girder reinforcement based on Swin U-Net[C]. Proceedings of SPIE, 2026, 14128: 141283M.

4.  张凯,王斐亮,庞博,等. 基于SE-ResNet50残差网络的瓷砖粘结界面损伤自动检测方法 [J]. 建筑科学, 2025, 41 (11): 116-126.

5.  庞博，艾岩，张家奇，等．知识驱动的梁桥点云实例级分割技术. 土木与环境工程学报(中英文), 2025, 1-7.

6.  Pang B, Zhang J, Zhang S, et al. Point cloud-based modelling of footbridge crossing operating railway line[C]// 2nd International Symposium on Civil Engineering and Smart Structure Technology, 2025

7.  Yasin Amara Sekou S Dra, Yang J, Wang T. Carbon Emission of Bituminous Pavement M&R Technology Based on Life Cycle Assessment (LCA): The Quota and Emission Factor Approach[C]//World Transport Convention 2025 (WTC 2025). Suzhou, China, 2025.

8.  Li H, Yang J, Zhang N, Nazar S, Ren Y, Wang L. Recycling fiber-reinforced polymer waste in the construction industry[C]//RILEM Youth Symposium 2025 - RYS2025: 1st RILEM Youth Symposium on Building Materials and Construction. Online: RILEM, 2025.

9.  Xiong Jianfeng, Zhang Shiwei, Zhang Jiaqi, Huang Jia, Wen Xihua, Yang Jian, Wang Feiliang. Simulation on load-carrying capacity of scaffold structures with imperfections [C]// International Symposium on Civil Engineering and Smart Structure Technology, 2025.

10. Fang Zhen, Zhou Xiaofa, Zhou Xiaosheng, Zhang You, Yang Jian. Building Energy Systems in New Power Grid: A Comparative Analysis of Green and Zero-Carbon Buildings from Energy Engineering Perspective[C]// 5th IEEE International Conference on Energy Engineering and Power Systems, 2025.

11. Yasin Amara Sekou S Dra, Zhou Xiaofa, Wang Xiaofeng, Jin Shanshan, Yang Jian. Integrating Photovoltaic Systems and Green Facades for Building Carbon Emission Reduction: A Quantitative Life Cycle Assessment Study[C]// 5th International Conference on Environmental Pollution and Governance, 2025.

12. Zhang Anshan, Zhou Xiaofa, Wang Feiliang, Chen Shufan, Yang Jian. Analysis of the demand for carbon emission management[C]// 5th International Conference on Environmental Pollution and Governance, 2025.

13. 李新宇,刘飞,杨健,梅勇,刘洪涛.基于深度学习的施工现场安全防护智能识别方法[J].防护工程,2025,47(03):44-50.

14. Zhang A, Zhou X, Cao K, et al. Architecture and Functional Design of Carbon Emission Management Platform for Building Construction[C]//Journal of Physics: Conference Series. IOP Publishing, 2025, 3005(1): 012012.

15. 李粒珲,王相权,姚羿舟,毛丽璇,杨健.基于背散射电子–X射线能谱图像智能分析的胶凝材料微观多模态多视图表征[J].硅酸盐学报,2025,53(08):2362-2373.

16. 陆敏铖，张安山，皇甫一震，程中昊，胡戈鸣，杨健，温希华，王斐亮. 透光产能型建筑外立面（TEP-BEF）性能化和智能化技术综述[J]. 建筑科学，2025.

17. 林煜铭,杨健,谢东东,王星尔,宋春雨.浮式风机钢-混组合立柱的HSEC切条试件抗弯性能研究[J].海洋工程,2025,43(03):70-83.

18. 刘君, 杨健. 建筑设计阶段利益相关方影响分析[J]. 建筑科技, 2024, 8(4): 49–51, 56.

19. Pan Z, Yang J, Wang X-E, et al. Influence of Scratch on the Crack Pattern of Monolithic Glass under Flexural Loading[C]. Challenging Glass Conference Proceedings, 2024, 9.

20. Yang J, Li J, Li G, et al. Mlphand: real time multi-view 3d hand reconstruction via mlp modeling[C]//European Conference on Computer Vision. Cham: Springer Nature Switzerland, 2024: 407-424.

21. 尹俊熙,彭沈楠,王星尔,杨健.基于卷积神经网络的夹层玻璃开裂后拉伸性能快速评估方法[J].硅酸盐通报,2024,43(12):4588-4596.

22. 周思成, 杨健, 汪来发, 等. 考虑拉索非线性效应的大跨斜拉桥拉索多级张拉控制方法[J]. 美加墨世界杯官方网站学报, 2024: 1–17.

23. 张劲逸, 白李, 王颖轶, 杨健, 王斐亮. 非线性材料薄壁I形截面构件相关屈曲变分模型[J]. 应用力学学报2024:1-14.

24. 彭沈楠, 杨健, 王星尔, 陆敏铖, 朱禹翰. 裂纹形态对SG夹层玻璃开裂后硬化效应的影响机制[J]. 美加墨世界杯官方网站学报2024:1-23.

25. Han Z, Wang Y, Tao Y, Zhang A, Fan D, Pan L, Yang J, Yang J. Study and Evaluation of Carbon Emission Calculation Methods for Transmission Line Laying Projects[C]//2024 5th International Conference on Power Engineering (ICPE). IEEE, 2024: 736-744.

26. Zhang A, Wang F, Zhou X, Sun B, Yang J. Review of the Application of Key Technologies of Building Digitization in Building Carbon Emissions Reduction. 12th International Symposium on Project Management (ISPM2024), Beijing: 2024, p. 1738–47.

27. Pan Z, Yang J, Wang X, Li G, Jiang X. Influence of scratch on the crack pattern of monolithic glass under flexural loading. Challenging Glass Conference Proceedings 9, TU Delft, The Netherlands: 2024.

28. Xie D, Yang J, Wang X, Jiang X, Li G. Mechanical enhancement of fractured laminated glass considering fragment overlaps and temperatures. Challenging Glass Conference Proceedings 9, TU Delft, The Netherlands: 2024.

29. Xia T, Ledbetter A, Bobe A, et al. Interactive AI for Generative Housing Design Based on Graph Neural Networks and Deep Generative Models[C]//Computing in Construction. 2024, 5.

30. 鲍朱杰, 李祯, 王斐亮, 庞博, 杨健. 基于机器学习的直角扣件滑移和扭转性能预测方法[J]. 美加墨世界杯官方网站学报, 2023.

31. 周练, 张凯, 徐涵, 王斐亮, 章一萍, 唐丽娜, 等. 负风压作用下隐框玻璃幕墙承载行为和脱胶损伤实验研究[J]. 美加墨世界杯官方网站学报, 2023.

32. 王义戈, 王星尔, 杨健, 刘强. 考虑碎片膨胀效应的物理钢化夹层玻璃开裂后变形分析模型[J]. 应用力学学报, 2023.

33. 黄小坤, 刘强, 杨健, 聂建国, 韩维池, 张燕红, 等. 玻璃结构关键技术和设计方法研究与应用. 建设科技 2023:47–51.

34. Wang X, Yang J, Peng S, et al. Microscale Discrete Element Model for Simulating Bridging Behavior of Fractured Glass Laminates[C]//Challenging Glass Conference Proceedings. Ghent University, Ghent, Belgium: 2022, 8.

35. Xie D, Yang J, Wang X, et al. Thermal Rheological Behavior of Composite Interlayer in Laminated Glass[C]//Challenging Glass Conference Proceedings. Ghent University, Ghent, Belgium: 2022, 8.

36. Pan Z, Yang J, Wang X, et al. Non-Contact 3D Characterization System of Scratch-Induced Surface Damage on Monolithic Glass Panel[C]//Challenging Glass Conference Proceedings. Ghent University, Ghent, Belgium: 2022, 8.

37. Hu Y, Yang J, Baniotopoulos C. Bearing Capacity of Tall Monopile Offshore Wind Turbine Towers Under Environmental Loading[C]//HUYNH D V K, TANG A M, DOAN D H, et al.Proceedings of the 2nd Vietnam Symposium on Advances in Offshore Engineering. Singapore: Springer Singapore, 2022: 413–423.

38. Hu L, Feng P, Meng Y, et al. Study on Buckling Behavior of Prestressed CFRP-Reinforced Steel Columns by FEM and ANN[C]//ILKI A, ISPIR M, INCI P.10th International Conference on FRP Composites in Civil Engineering. Cham: Springer International Publishing, 2022: 2322–2332.

39. 朱禹翰, 杨健, 王星尔, 等. 物理钢化玻璃裂纹形态试验及Voronoi形态表征[J]. 硅酸盐学报, 2022, 50(02): 482–491.

40. 赵宸君, 杨健, 王星尔, 等. 影响夹层玻璃脱胶因素研究分析[J]. 新型建筑材料, 2022, 49(05): 20–24.

41. 赵宸君, 杨健, 王星尔, 等. 基于国内外标准的结构用玻璃构件承载性能设计对比[J]. 建筑结构学报, 2022, 43(03): 212–222.

42. 杨健, 张安山, 庞博, 等. 元宇宙技术发展综述及其在建筑领域的应用展望[J]. 土木与环境工程学报(中英文), 2022: 1–14.

43. 谢东东, 杨健, 王星尔, 等. 夹层玻璃PVE中间膜热流变行为及松弛特性[J]. 中南大学学报（自然科学版）, 2022, 53(11): 4523–4533.

44. 李方, 杨健, 李粒珲. 废玻璃粉作为辅助胶凝材料对砂浆性能影响及作用机理[J]. 硅酸盐通报, 2022, 41(09): 3208–3218.

45. Zhang AnShan，Yang Jian*，Wang FeiLiang，et al. A framework of carbon emission comprehensive evaluation standard for operation and maintenance of parks[C].2022 4th International Conference on Civil Engineering, Environment Resources and Energy Materials（CCESEM 2022）

46. 黄栩浩, 杨健, 王星尔,等. 负泊松比碳纳米管增强层合结构预测与设计[J]. 应用力学学报, 2021, 38(4): 1408-1414.

47. 杨子晴, 杨健, 熊吴越. 基于改进分水岭算法的堆积态再生混合粗骨料图像分析[J]. 硅酸盐学报, 2021, 49(8): 1691-1698.

48. 何文景,杨健,熊吴越.基于深度学习的三维点云自动生成BIM模型方法[J].土木工程与管理学报,2021,38(03):133-139.

49. 任明根,杨健,高皖扬,王星尔,赵宸君.温度作用下热塑及热固性中间膜拉伸与撕裂性能研究[J].新型建筑材料,2021,48(05):1-6.

50. 张景博,杨健,王斐亮.带填充墙预制混凝土框架抗连续倒塌分析[J].美加墨世界杯官方网站学报,2021,55(04):357-364.

51. 赵宸君, 杨健, 王星尔, 王义戈. 2020. 新型复合共聚物膜本体及其与玻璃粘结性能研究. 第十一届无机材料结构、性能及测试表征技术研讨会程序册与摘要集[C].中国硅酸盐学会测试技术分会:中国硅酸盐学会. 2020.

52. 潘珠峰, 杨健, 王斐亮, 陆依晖, 张景博. 典型连接节点对钢框架抗连续倒塌性能影响研究进展.建筑结构. 2020, 50(24), 11-18.

53. 孟嫣然, 王星尔, 杨健, 徐涵, 岳峰. 2020. 基于机器学习算法的夹层玻璃冲击破坏预测模型研究. 无机材料学报. 36(1), 1-8.

54. 张强, 杨健, 王星尔, 徐涵, 孟嫣然. 2020. 基于结构响应向量和支持向量机的框支承玻璃幕墙连接松弛状态智能识别. 硅酸盐学报. 48(10), 1682-1688. 

55. 陆虓, 杨健, 苏昊林, 王斐亮. 2021. 聚丙烯纤维增强再生骨料混凝土性能研究. 混凝土. 373, 67-71+74. 

56. Pan Z, Yang J, Wang X-E, et al. Surface scrach detection of monolithic glass panel using deep learning techniques [C]. ICCCBE+CIBW78 conference, 2020.

57. Zhao C, Yang J, Wang X-E, et al. Experimental and numerical investigation into the mechanical behavior of embedded laminated connections [C]. Challlenging Glass, 2020, 7, 4551. 

58. Yang Z, Yang J, Yuan E. Safety monitoring of construction equipment based on multi-sensor technology. 2020, 7, 677-684. 

59. Wang X-E, Yang J, Pan Z, et al. Combined Voronoi-FDEM approach for modelling post-fracture response of laminated tempered glass [C]. Challenging Glass, 2020.

60. 赵宸君,杨健,王星尔,黄小坤,刘强.基于国内外设计标准的结构用玻璃构件承载性能对比[J/OL].建筑结构学报:1-10[2021-11-25].

61. 张强,杨健,王星尔,徐涵,孟嫣然.基于结构响应向量和支持向量机的框支承玻璃幕墙连接松弛状态智能识别[J].硅酸盐学报,2020,48(10):1682-1688.

62. 潘珠峰,杨健,王斐亮,陆依晖,张景博.典型连接节点对钢框架抗连续倒塌性能影响研究进展[J].建筑结构,2020,50(24):11-18.

63. 刘炘炜，杨健，王星尔，刘强. 2020. 冲击致损的夹层玻璃板开裂后的静载强度. 美加墨世界杯官方网站学报. 54(3), 227-238.

64. 王星尔，杨健，王翰坤. 2019. 夹层热钢化玻璃裂纹形态表征及开裂后力学行为. 硅酸盐学报. 47(8), 1039-1045.

65. 徐涵，杨健，王星尔，赵宸君，孟嫣然，潘珠峰. 2019. BP神经网络在隐框玻璃幕墙脱胶损伤识别中的应用. 硅酸盐学报. 47(8), 1073-1079.

66. 陆依晖，杨健，王斐亮，刘清风. 2019.  CFRP加固组合梁承载力性能实验研究. 玻璃钢/复合材料，2, 13-19.

67. 张杨梅，王星尔，杨健，刘清风. 2018. 多层SGP夹层玻璃受刚体冲击作用的实验研究。无机材料学报, 33(10):1110-1118.

68. 汤建新， 陈冬威， 杨 健， 宫 婷， 潘珠峰. 2018.个性化装配式住宅建筑形式WikiHouse浅析.建筑施工，40（10），1833-1837.

69. 胡行, 杨健, 王斐. 018. 夹层玻璃在外部刚体冲击下的破坏机理试验研究. 科技通报. 34(6). P184–188.

70. Xing-er Wang, Jian Yang, Han Xu. 2018. Experimental Investigation on the Impact Resistance of Laminated Glass with Various Glass Make-ups. Challenging Glass 6 - Conference on Architectural and Structural Applications of Glass Louter, Bos, Belis, Veer, Nijsse (Eds.), Delft University of Technology. (122). P91-108.

71. Xing-er Wang, Jian Yang. 2018. Experimental and numerical investigation into the interfacial debonding in multi-layered laminated glass under hard body impact. The 15th International Symposium on Structural Engineering, Hangzhou, China.

72. Feiliang Wang, Jian Yang. 2018. Pseudo-Plastic Behaviour of Multi-span Beams With Cold Formed Sigma Sections: A Numerical Study. The 15th International Symposium on Structural Engineering, Hangzhou, China.

73. 王斐亮, 杨健, 潘珠峰. 2018. 考虑覆面轻钢龙骨填充墙影响的钢框架抗连续倒塌性能研究. 第五届建筑结构抗倒塌学术交流会.

74. M. A. Sadeghian, Jian Yang. 2018. Structural vibration control using inerter-based devices: a review of the state of the art. The 7th World Conference on Structural Control and Monitoring, Qingdao, China.

75. Wuyue Xiong, Jian Yang, Zhaojing Wang, Hao Hu, Feng Xu, Jingbo Zhang. 2018. Improving supply chain communications for off-site construction using Process Specification Language. 35th International Symposium on Automation and Robotics in Construction.

76. 潘珠峰, 杨健, 王斐亮, 陆依晖, 张景博. 2018. 典型连接节点对钢结构抗连续倒塌性能影响研究进展. 第十八届全国现代结构工程学术研讨会.

77. 王曈，杨健，王星尔. 台风作用下玻璃幕墙连续性破坏分析。建筑技术, 48(4), 2017, 342-345.

78. 宫婷，杨健，徐峰，胡昊. WikiHouse 装配式住宅中连接节点刚度分析。建筑技术，48(8)，2017,822-825.

79. 余小寅，杨健，胡志 2017. 浅谈3D打印建筑技术的应用。上海建材，3,33-35

80. 杨健，余小寅 2017. 既有建筑玻璃幕墙安全问题及在线检测技术现状分析. 华东科技。

81. 王献忠，杨健，沙斌，宫婷，王曈，胡行，张杨梅 2017. 预制装配式混凝土结构体系与关键技术的研究. 建筑施工，2，273-275.

82. 韩岩，杨健，王斐亮，刘清风，白李. 冷弯薄壁型钢节点刚度的数值分析和预测模型. 上海交大学报 50(11), 2016, 1676-1681. 

83. 卢显扬，杨健，刘清风，胡宇。离岸混凝土氯离子扩散系数的人工神经网络模型。河北工程大学学报 33(1), 2016, 5-10.

84. 季清,杨健,周岱. 夹胶建筑玻璃板后破坏强度分析[J]. 美加墨世界杯官方网站学报,2016,01:30-34+46.

85. 陈颖; 季清; 史阳; 杨健; 刘清风. 2015, 建筑玻璃强度的测定. 河北工程大学学报(自然科学版), 32(2), 52-55.

86. 苏文兰,杨健,赵涛. 悬臂中厚矩形板的非线性弯曲[J]. 美加墨世界杯官方网站学报,2001,10:1497-1502.

87. 杨健,沈惠申,苏文兰. 粘钢补强板的弯曲、屈曲与振动[J]. 美加墨世界杯官方网站学报,2000,08:1069-1073.

88. 杨健,沈惠申,张乐. 桥梁基桩的屈曲荷载计算[J]. 美加墨世界杯官方网站学报,2000,04:533-537+541.

89. 张乐,沈惠申,杨健. 脉动流诱发复合材料层合板动力响应[J]. 美加墨世界杯官方网站学报,2000,08:1083-1086.

90. 杨健; 王星尔; 王瞳; 张杨梅; 赵世伟. 2015. 建筑玻璃抗冲击性能研究, 第24届全国结构工程学术会议论文集（第Ⅱ册）

91. 陈旭东; Andrew H C Chan; 杨健, 2015. 普通玻璃受冲击破坏的有限离散元方法分析. 第24届全国结构工程学术会议论文集（第Ⅰ册）.

92. 杨健; 刘清风; 陈家伟; 周岱; 季清. 2015. 基于修正压力场理论的GFRP混凝土梁截面抗剪承载力分析. 第24届全国结构工程学术会议论文集（第Ⅰ册）.

93. 杨健; 包旻熙.2013. 中空玻璃的耐久性研究. 2013年全国建材建工测试与评价新方法、新技术、新设备技术交流会会议资料集.

94. 包亦望,韩松,王秀芳,杨健. 建筑玻璃的结构-功能一体化设计[J]. 门窗,2008,12:9-13.

95. 包亦望 韩松 王秀芳 杨健. 玻璃产品在太阳能电池行业的应用[N]. 中国建材报,2009-01-09003.

96. 包亦望 韩松 王秀芳 杨健. 建筑玻璃的结构/功能一体化设计[N]. 中国建材报,2008-12-12003.

97. 陆依晖,杨健; 预制混凝土框架结构节点设计对其连续倒塌性能的影响[A]; 第四届建筑结构抗倒塌学术交流会[C];2016年

98. 胡宇,杨健; 钢筋混凝土结构抗连续性倒塌研究和设计进展[A]; 第四届建筑结构抗倒塌学术交流会[C];2016年

99. Shaban, W. M., & Yang, J. (2016). Strengthening techniques of recycled concrete aggregate-A state- of- art review. Korea Recycled Construction Resources Institute International Conference, KOREC2016, 11-22.

100.   Wang X, Yang J, Wang T, Xiong W. Evaluation of DEM and FEM/DEM in Modeling the Fracture Process of Glass Under Hard-Body Impact. In Proceedings of the 7th International Conference on Discrete Element Methods 2016 (pp. 377-388). Springer Proceedings in Physics, 188, Springer Singapore. (EI)

101.   杨健,包旻熙. 中空玻璃的耐久性研究[A]. 中国硅酸盐学会测试技术分会.2013年全国建材建工测试与评价新方法、新技术、新设备技术交流会会议资料集[C].中国硅酸盐学会测试技术分会:,2013:13.

102.   季清,杨健,周岱. GFRP混凝土梁抗剪机理及强度分析[J].第六届高强与高性能混凝土委员会成立大会暨第九届全国高强与高性能混凝土学术交流会,福州怡山.

103.   Shaban, W. M., & Yang, J. (2016). Strengthening techniques of recycled concrete aggregate-A state- of- art review. Korea Recycled Construction Resources Institute International Conference, KOREC2016, 11-22.

104.   Yazdi M.A. Ehsan, M. Yang, J. Fresh and hardened properties of self-compacting mortar containing nano-TiQ2 and fly ash. 14th International Congress on Chemistry of Cement, Beijin, 2015. P351-

105.   Liu, Q.F., Feng, G. L., Li, L. Y., Xia, J. Yang, J. Easterbook, D. Numerical Modeling of Cracking Effect on Chloride Transport During Multi-ionic Migration in Concrete. Banthia, N. Miyagawa, T. Miao, C. Kobayashi, K. Advances in Construction Materials. Proceedings of the ConMat’15 Conference. Whistler, Canada 2015. 

106.   Yang, J. Su, H. Dhir, R.K, Ghataora, S.G. Recycled rubber concrete and its use in construction. Dhir, R. K, Singh SP. Bedi, R. Goel S. Concrete Research Driving Profit and Sustainability. Proceedings of the International UKIERI Concrete Congress, Punjab India, 2-5 November, 2015. P 567-591.

107.   Tijani, A., Yang, J., and Dirar, S., “High performance concrete using recycled aggregate, Microsilica and synthetic macro fibre,” Proceedings of the Second International Conference on Advances in Civil, Structural and Mechanical Engineering (CSM 2014), Birmingham, United Kingdom, 2014, 4pp. 

108.   Yang, J., Su, H., Ghataora, G., Dirar, S. Effect of surface pre-treatment of waste tire rubber aggregate on workability and compressive strength of concrete. Young Researchers’ Forum II: Construction Materials, London, UK, February 2014, 177-182.

109.   Tohidi, M, Yang, J. An improved tie force method for progressive collapse resistance of precast concrete cross wall structures (analytical method). International Conference on Civil, Structural and Environmental Engineering, Zurich, Switzerland, January 14 - 15, 2014.

110.   X. Chen, A. H. C. Chan and J. Yang.  FEM/DEM modelling of hard body impact on the laminated glass. Applied Mechanics and Materials, special issue for 1st ACCM conference, accepted. 2014.

111.   X. Chen, A. H. C. Chan and J. Yang, 2013. Implementation of an elasto-plastic fracture model in the FEM/DEM. 6th International Conference on Discrete Element Methods (DEM6), Golden, USA, 301-306.

112.   Minxi Bao, Jian Yang, Baniotopoulos, C.  Experimental study on the aging performance of secondary silicone sealant of insulating glass units. Civil Engineering for Sustainability and Resilience International Conference, CESARE ’14, 24-27 April 2014, Amman, Jordan.

113.   Hu, Y. Baniotopoulos C. Yang J. Structural design optimisation for wind turbine towers using advanced FEM models. Proceedings for the International Conference of Civil Engineering for Sustainability and Resilience CESARE’14, 2014, Jordon, P388.

114.   Minxi Bao, Jian Yang, Andrew Chan. 2D and 3D numerical modelling of structural performance of IGUs sealant under in-service environmental actions, COST Action: TU0905, symposium of COST Training School on Structural Glass, 02 – 06 April, 2012, Ghent, Belgium, pp 1-4

115.   Rungthonkit, P. Yang, J. Clark, L.A. Experimental, numerical and analytical investigation of long-term behaviour of structural insulated panels. Proceedings of the First Conference on Performance-based and Life-Cycle Structural Engineering (PLSE 2012), 5-7 December 2012, Hong Kong, Chinn. Edited by Teng, J.G. Dai, J.J. Law， S.S. Xia, Y. and Zhu, S. Y. 1869-1878.

116.   Tohidi, M. Yang, J. Baniotopoulos, C. Numerical simulation of floor joint behavior for progressive collapse resistance design in precast concrete cross wall structures. 2013 PCI Convention and National Bridge Conference, September 21 – 24, Grapevine, Texas,the USA. 329-335.

117.   Yang, J. Bao, Y, Bao, M. and Han, E.  Post-breakage strength of glass used as a structural material. Glass Performance Days, Shanghai China, 31 March – 1 April 2012.

118.   Bao, Y. Yang, J. Liu, X. Nondestructive test for energy-saving glass in building. Glass Performance Days, Shanghai China, 31 March – 1 April 2012.

119.   Bao, Y. Liu, X. Qiu, Y. Yang, J. Novel testing techniques for building glass in service conditions. Challenging Glass 3 – Conference on Architectural and Structural Applications of Glass. TU Delft, June 2012.

120.   Bao, M. Yang, J. Contact damage near the  supporting pillars in vacuum glazing units. Challenging Glass 3 – Conference on Architectural and Structural Applications of Glass. TU Delft, June 2012.

121.   Kuruvita L., Yang, J. and Chan, A. H.. Numerical Investigation into Low-Velocity Impact Response of Monolithic Glass by a 3D Finite Element Method. The 20th UK conference of the Association for Computational Mechanics in Engineering, 27-28th March, University of Manchester, UK.

122.   X. Chen, A. H. C. Chan and J. Yang, 2012. Investigation on impact damage of glass using combined finite-discrete element method. 20th ACME Conference, Manchester, UK, 227-230.

123.   Su H., Yang J., Waterhouse M., McNicholas I., Kang J., Properties of concrete with recycled rubber material. The 4th Asia-Pacific Young Researchers and Graduates Symposium, Hong Kong, China, December 2012.

124.   Tohidi, M. and Yang, J. Study into mitigation methods for progressive collapse of precast concrete cross wall buildings. 11th International Conference on Concrete Engineering and Technology 2012(CONCET2012),12th –13th June 2012, Putrajaya, Malaysia.

125.   Yang, J. Liu, Q. and Chan, A.H. Flexural behaviour of purlin-roof-sheeting assemblies. The Seventh International Conference on Advances in Steel Structures  (ICASS 2012) in conjunction with IJSSD symposium on Progress in Structural Stability and Dynamics, Nanjing, China,6 - 8 April 2012

126.   Zhao C; Yang J; Liu Q. Investigation into the Rotational Stiffness of Cold-formed Steel Purlin-Sheeting Connection. 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures. Singapore, 2-4 July 2012.

127.   Minxi Bao, Jian Yang, Andrew Chan. Numerical Modelling of the Structural Performance of IGUs under In-Service Environmental Actions, Proceedings of 3rd International Postgraduate Conference on Infrastructure and Environment, 11 &12 July, 2011, Hong Kong, pp265-272.

128.   Chongxiao Zhao, Jian Yang, Andrew Chan. ‘Experimental investigation into cold-formed sigma steel purlins and roof sheeting interaction,’ Proceeding of 3rd International Postgraduate Conference on Infrastructure and Environment, Hong Kong, China.

129.   X. Chen, A. H. C. Chan and J. Yang, 2012. Investigation on impact damage of glass using combined finite-discrete element method. 20th ACME Conference, Manchester, UK, 227-230.

130.   Yang J. Liu Q. Experimental study of cold-formed steel sigma purlins with sleeved connections. Proceedings of the 6th International Conference on Thin walled Structures Recent Research Advances and Trends,  ICTWS 2011, Ed. Dubina and Ungureanu, 649- 656, 5th – 7th Sep. 2011. Timisoara, Romania. ISBN: 978-92-9147-102-7.

131.   Yang, J. Zhen L. and Du Q. State-of-the-art research and application of structural insulated panels (SIPs). Proceedings of CEBM 2011, 30th -31st  July 2011. Kunming, China. 

132.   Chongxiao Zhao, Jian Yang, Andrew Chan. ‘Investigation into the rotational stiffness of cold-formed steel purlin-sheeting connection’, 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures, Singapore, 2011.

133.   Chongxiao Zhao, Jian Yang, Andrew Chan. ‘Experimental investigation into cold-formed sigma steel purlins and roof sheeting interaction,’ Proceeding of 3rd International Postgraduate Conference on Infrastructure and Environment, Hong Kong, China.2011.

134.   Yang, J. Sun, Y. Structural behaviour of composite cladding panels. Proceedings of The 19th Annual International Conference on Composites/Nano Engineering, ICCE-19, 24th -30th July 2011. Shanghai, China.

135.   Yang, J. Liu, Q. Pseudo-plastic design of continuous beams with cold-formed sigma sections. Advances in Steel and Aluminium Structures. Ed. By Lau Hieng Ho. ISBN: 978-981-08-9247-0. 2011.  doi:10.3850/978-981-08-9247-0_rp022-icsas11.

136.   Liu, Q. Yang, J. Li, L. Y. Numerical analysis of cold-formed sigma steel beams, 199-204. Discrete Element Methods, Simulations of Discontinua: Theory and Application. Ed. By Antonio Munjiza. ISBN: 978-0-9551179-8-5. 2010.

137.   Chen Xudong, Chan Andrew HC and J. Yang. A case study of impact on glass using the combined Finite-Discrete Element method. Discrete Element Methods, Simulations of Discontinua: Theory and Application. Ed. By Antonio Munjiza. ISBN: 978-0-9551179-8-5. 465-469. 2010.

138.   Liu, Q. Yang, J. Experimental study on post-buckling and post-failure behaviour of cold-formed Sigma continuous steel beams at internal supports. Sixth International Conference on Advances in Steel,  ICASS’09. Dec. 2009.

139.   Shen, H. Yang, J. Numerical study of dynamic buckling of axisymmetrical cylindrical shell subjected to axial impact. Sixth International Conference on Advances in Steel, ICASS’09. Dec. 2009.

140.   Rungthonkit, P. Yang, J. Behaviour of Structural insulated Panels (SIPs) under both short-term and long-term loadings. 11th International Conference on Non-conventional Materials and Technologies Materials for Sustainable and Affordable Construction, University of Bath, Bath, Uk, 6th-9th Sep. 2009. ISBN No. 9781861971784.

141.   Y. Bao, L. Liu, S. Hang and J. Yang. Optimization Design and Robustness of glass structure. Glass for Processing Days, Beijing, China, 8-9 April, 2008. 

142.   Y. Bao, D. Wan, and J. Yang. Robustness and property Evaluation of Building Ceramics and Glass.  2nd International Congress on Ceramics, Verona, Italy, 29 June – 4July, 2008. 

143.   Yang, J. Impact resistance of structural glass. Proceedings of International Conference on Building Envelope Systems and Technology 2007, Bath, UK, March, 2007, Bath, 75-86,ISBN No. 9781874003441.

144.   Yang, J, Ye, J. A layer-wiser Fourier expansion approach for stress transfer in cross-ply laminates with transverse matrix cracks. Proceedings of Sixteenth International Conference on Composite Materials, Kyoto, Japan, July, 2007, Kyoto, 740-741, ISBN No. 9784931136069.

145.   Yang, J. and Ye, J. Closed-form rigorous solution for the interfacial stress in plated beams using a two-stage method. Proceedings of the International Symposium on Bond Behavior of FRP in Structures, Hong Kong China, 7-9 December 2005, 175-182. ISBN No. 962-367-506-2 .

146.   Ye, J. and Yang, J. An investigation on the stress transfer in concrete beams bonded with FRP Plates. Proceedings of the International Symposium on Bond Behavior of FRP in Structures, Hong Kong China, 7-9 December 2005,  183-188. ISBN No. 962-367-506-2. 

147.   Yang, J., Chen, J.F. and Teng, J.G. A new approach for interfacial stress analysis of beams bonded with a thin plate. Proceedings of 2nd International Conference on FRP Composites in Civil Engineering, Adelaide, Australia, 8-10 December 2004, 413-421. ISBN No. 9058096386

148.   Yang, J., Chen, J.F. and Teng, J.G. Interfacial Stresses in Plated RC Beams under Arbitrary Symmetric Loads: a High-Order Closed-Form Solution. In: Proceedings of Advanced Polymer Composites for Structural Applications in Construction, Southampton, 2002. ISBN No. 072773122X

2025 – 至今，数智化理论与技术
2023 – 至今， 国际暑期实习

2013/07 – 至今，全英文研究生课程：可持续性建设，学时32

2014/02 – 至今，全英文研究生课程：变分原理与有限元方法，学时48

2018 – 2019， 国际暑期课程，学时32

2018 – 2020，船建学院研究生核心课程建设《可持续性建设》

2019 – 2021， 双一流全英文建设课程《变分原理与有限元》

2019 – 2021， 交叉模块课程《绿色建筑设计和技术》

2019  –  2021， 国际实习基地建设

2016 – 2017，研究生课程教学改革研究项目《项目式教学方法在新兴课程中的应用与探索》

2019 – 至今，学术写作、规范与伦理，中文16学时、英文16学时

国内外共完成指导了6个博士后，31个博士，72个硕士毕业生（MEng, MSc & MPhil)

专利与软著：

1.   软著：基于组合模型的建筑能耗预测系统V1.0，登记号：2025SR0714731；

2.   软著：建筑能耗异常来源诊断系统V1.0，登记号：2025SR1624307；

3.   软著：模板支架倒塌风险评估系统V1.0，登记号：2025SR1624326；

4.   软著：基于BSE-EDS的微观物相分布组成分析软件V1.0，登记号：2025SR0138134；

5.   专利：碱激发粉煤灰矿渣胶凝体系反应产物识别和分类方法，ZL202411406398.9； 

6.   软著：基于多尺度描述子的古建筑点云语义分割软件V1.0，登记号：2024SR0396397；

7.   软著：基于加速度监测的玻璃幕墙约束失效风险分析软件V1.0，登记号：2024SR0537782；

8.   软著：玻璃幕墙结构安全物联网项目监测管理系统V1.0，登记号：2021SR0951698；

9.   专利：一种钢木元件木材蠕变耐久性评估的多尺度方法，CN113707243B

10. 专利：TRM格栅的张拉装置、张拉加固系统及方法，CN114941449B

11. 专利：一种增强磷酸镁水泥复合材料及其制备方法，CN2020 1 0806447.3

12. 软著：基于MATLAB与AutoCAD的三维不规则骨料混凝土细观模型随机生成软件V1.0 ，软著号：9417364；

13. 发明专利： 一种全自动玻璃表面抗耐磨损性能测试装置及方法，申请号：2021104945819.

14. 发明专利： 一种复合改性剂、增强水泥基复合材料及其制备方法，CN202010770045.2

15. Indian Patent, Sustainable cement concrete composite. 374296.

16. Innovation Patent, High strength cement incorporating discarded tire rubber ash as a partial replacement for binder, ensuring sustainability in construction industry. 2020102116

17. 一种混凝土结构耐久性预测方法、系统及终端。 CN110737967B，2021-07-30

18. 实用新型： 一种全自动玻璃面板微裂纹检测平台。 专利号：ZL2019 2 1777098.6. 

19. 专利： 无极变速器及半主动调谐粘滞惯性阻尼器。中国，专利号： ZL 2019 1 1268919.8.

20. 专利：一种半主动调谐质量惯性阻尼器。中国，专利号：ZL2020 1 0199463.0

21. 软著：基于组合有限离散元法的玻璃结构破坏仿真模拟软件 V1.0, 2021SR0478213。

22. 软著：玻璃幕墙传感器串口数据采集-解析系统软件v1.0，2021SR0525707。

23. 软著：玻璃幕墙结构安全物联网项目监测管理系统，2021SR0951698。

24. 软著：历史保护建筑长期值守健康监测系统，2021SR0951698，2021-06。

25. 实用新型： 一种用于提升装配式混凝土结构延性的钢筋连接器。 中国，专利号： ZL 2019 2 1332822.4

26. 软著：全玻璃面板安全性智能监测及分析软件，中国，软件著作权，2018SR996322

27. 软著：基于神经网络的混凝土耐久性预测软件，中国，软件著作权，2016SR271950

28. 软著：多因素耦合作用下混凝土电化学修复效果预测软件，中国，软件著作权，2018SR709431

29. 实用新型：一种拆装式多功能试验台，中国，实用新型，201920016101.6，授权日2019, 12. 24

30. 实用新型：一种拆装式多功能试验反力架，中国，实用新型，CN214096904 U，20202310025.9，授权日2021.8.31

31. 实用新型：一种玻璃幕墙脱胶检测装置及其检测方法，中国，实用新型，201920261081.9，授权日2020, 02. 07

32. 实用新型：一种压力自平衡真空玻璃无变形复合结构，中国，实用新型，ZL 2014 1 0086343.4

33. 发明专利：玻璃幕墙支座，CN 113898097 A

34. 发明专利：基于施工机械的碳排放测量系统，CN 117657301 A

35. 发明专利：建筑幕墙结构健康状态智能监测传感系统、服务端及方法，CN 118623933 A

36. 发明专利：无级变速器及半主动调谐粘滞惯性阻尼器，CN 110985602

37. 发明专利：一种变电站预制内隔墙与楼板之间的连接装置及方法，CN107060152 A

38. 专利：一种沉降预测方法、系统和设备，CN 116757303 A

39. 专利：一种非接触式既有玻璃幕墙牢固度检测方法，CN 117571830 A

40. 发明：一种混凝土浇筑平整器，CN 103817771 B

41. 发明专利：一种机场跑道振动监测系统及方法，CN 117664225 A

42. 发明专利：一种基于声学成像技术的墙内管道路径分析方法，CN 117705943 A

43. 发明专利：一种建筑外饰面安全风险数字化检测系统级方法，CN 119492799 A

44. 发明专利：一种全自动玻璃表面抗磨损性能测试装置及方法，CN 113358509 A

45. 发明专利：一种设备机房用防火隔声门，CN 118390937 A

46. 发明专利：一种施工机械碳排放量计算方法、介质及系统，CN 118537765 A

47. 发明专利：一种输变电工程施工阶段的碳排放核算方法及系统，CN 116579641 A

48. 实用新型：一种碳纤维浸渍装置，CN 220808117 U

49. 发明专利：一种无砟轨道板钢筋骨架专用液压搬运车，CN 1038118415 A

50. 发明专利：一种吸声玻璃幕墙结构及制备方法，CN 118727971 A

51. 发明专利：一种吸声装饰石材及制备方法，中国，专利，CN 118745799 B，专利号：ZL 2024 1 0774999.9。授权公告日： 2026年01月27日。

52. 发明专利：一种新型简易钢筋绑扎器，CN 103821370 A

53. 发明专利：一种应用于机场的光伏板及光伏发电系统，CN 117674706 A

54. 实用新型：一种用于装配式竹结构的灌浆加强节点机构，CN209620254 U

55. 发明专利：用于3维盒式装配式轻钢结构多模块结构及其连接方式，CN 107503440 A

56. 发明专利：用于结构健康监测的多元数据采集与融合分析方法和系统，中国，专利，CN119862526 A，专利号：ZL 2024 1 1798091.8。授权公告日： 2026年01月23日。

标准：

1.国际标准ISO 21712-2020, Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural bond strength of ceramics, 已发布 （主持）

2.国家标准GB/T 39826-2021，精细陶瓷 界面弯曲强度测定 四点弯曲法，已发布（主持）

3.行业标准 2020-12-29，建筑用木基面材结构保温复合板， 已发布

4.团体标准： 中国工程建设标准化协会标准T/CECS 202X，玻璃结构工程技术规程

5.团体标准：上海市建筑学会团体标准T/ASSC MQ01-202X，座地式全玻璃幕墙技术标准，发布

2025 年，“双一流”研究生优质课程建设项目

2025年，全国大学生智能建造竞赛特等奖（指导老师）

2025年，中国国际大学生创新大赛（2025）高教主赛道国际项目（上海赛区）专项赛-银奖（指导老师）

2024年，中国国际大学生创新大赛（2024）高教主赛道国际项目金奖（指导老师，优秀创新创业导师）

2024年，中国国际大学生创新大赛（2024）高教主赛道国际项目铜奖（指导老师）

2024年，中国国际大学生创新大赛（2024）高教主赛道国际项目（上海赛区）金奖3项（指导老师，优秀创新创业导师）

2024年，中国国际大学生创新大赛（2024）高教主赛道国际项目（上海赛区）铜奖（指导老师）

2024年，第十届中国国际“互联网+”大学生创新创业大赛，获高教主赛道国际项目 金奖（指导老师，优秀创新创业导师）

2024年，第二届全国高校土建类学科（专业）优秀学位论文和优秀毕业设计评选结果（研究生组）三等奖（李粒珲 博士论文 基于BSE-EDS 图像的胶凝材料体系物相组成与微观结构定量化研究土木工程）

2023年第九届中国国际“互联网+”大学生创新创业大赛，李环宇“Rechargeable Carbon Fiber Cement Battery”获高教主赛道国际项目（上海）专项赛（指导老师）金奖 亚军

2023年第九届中国国际“互联网+”大学生创新创业大赛高教主赛道国际项目（上海）专项赛（指导老师）优胜奖

2023年 “数创未来 慧聚独墅湖”第九届校友创新创业大赛 “低碳建筑科技创新项目”获 （指导老师）三等奖

2023年国家级教学成果奖二等奖 “水土交融，场网共享”新时代大土木实践育人模式构建与示范

2022年上海市教学成果奖二等奖

2022年11月第八届中国国际“互联网+”大学生创新创业大赛全国总决赛，李环宇“改性再生碳纤维增强低碳建筑材料”获国际赛道研究生创意组金奖。

2022年8月 指导教师：杨健、王斐亮 队员：张安山、庞博、鲍朱杰、李佳潼“正泰杯”第七届中国研究生智慧城市技术与创意设计大赛三等奖《“立面医生”⸺既有建筑外围护体系数字化无损检测系统》 （3等奖1项）

2021 第三届“共创杯”智能建造技术创新大赛中，基于数字孪生的历保建筑智能化运维系统，优秀指导老师（1等奖1项）

2021 “海创汇杯”智慧城市与智能建造大学生创新创业赛，基于群体智能的装配式建筑供应链协同系统，优秀指导老师 （1项二等奖，2项三等奖）

2021，首届智慧城市创新应用大赛，基于数字孪生技术的大型公共空间安全管理系统，优秀指导老师 （1项二等奖）

2020，中国建筑材料联合会基础研究类，二等，基于多离子传输机制的混凝土耐久性能劣化与修复机理

2019， 指导大学生社会实践项目获“2019年全国大学生最佳暑期实践团队”

2019， 美加墨世界杯官方网站学生社会实践“优秀指导教师”

2017，上海市“知行杯”大学生社会实践项目大赛优秀指导教师

2017，美加墨世界杯官方网站“行万里路、知中国情”暑期社会实践优秀指导教师

2016，美加墨世界杯官方网站第六届“凯原十佳”教师

2017，上海铁路局科学技术进步奖，一等，大型铁路客站外幕墙维护设备研究

2017，上海土木工程科技技术奖，三等，地下空间利用低碳评估技术及应用

2016，中国建筑材料联合会技术发明类，二等，钢化玻璃自爆及建筑玻璃坠落风险检测和预测关键技术

2013，入选上海浦江人才

2013，入选江苏双创人才

2012，一项科研成果获英国结构工程师协会(IStructE)中英格兰分会年度科研奖

2011，两项科研成果获英国结构工程师协会(IStructE)中英格兰分会年度科研奖 

2025年，上海市自然科学家二等奖1项
2024年，科睿唯安“全球高被引科学家”

2022、2023、2024/2025中国高被引学者
2023年，华夏建设科学技术奖一等奖

2023年，中国建筑材料联合会，科技公益类，二等奖

2012，入选国家级青年人才